MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Windsor Power (http://forums.mustangworks.com/forumdisplay.php?f=8)
-   -   fly cutting pistons? (http://forums.mustangworks.com/showthread.php?t=20)

gpinto2 01-01-2001 06:00 PM
fly cutting pistons?
 
I have an 89 stock short block with Windsor Jr. heads,1.7 adjustable roller rockers.I would like to run the F-303 cam instead of the E-303 cam but dont want to fly cut the pistons.Is it possible to run the cam without messing with the stock block? THANX GUYS

racin85 01-02-2001 12:11 AM
Should be no problems.The only thing is watch the clearance with the 1.7rr.My buddy ran the F cam with TFS TW heads and 1.6rr with no problems.Good luck

------------------
85 capri,balanced .030 over 79 302,windage tray polished/weight matched rods w/arp bolts.63 289 heads port/polish with FMS windsor springs. Torker 289 intake,514 solidcam,1.6rr.mac long tubes,off-road h,and pro dumps.T-5`4.10's on auburn HD carrier.NOS CHEATER kit,pullies and plenty more.Best NA run
1.683 60ft 7.837 @ 87 12.353 @ 109.05
NOS,11.21@ 116 1.49 60ft


All times are GMT -5. The time now is 10:20 AM.