4.10 gears

swtstang · 06-22-2001, 06:28 PM

Can Someone with 4.10 gears tell me what rpm they are at in 5th gear at 100mph?

93CobraR · 06-22-2001, 06:33 PM

I pull about 107 in 4th at around 5600, so about 5000 in 5th.

------------------
87 GT, 4 inch cowl hood,17x9 Cobra R's/255/45's,GT-40 heads,Crane 2031, Edelbrock intake, long tubes headers,h-pipe,Flows,BBK cold air, Mass air,70mm MAF, 1.7's, 1" spacer,underdrive pulleys,Pro 5.0, King Cobra, Adj. fuel Reg., Lakewood Lift Bars,50/50's,subframes, 4.10's.
Best time 12.759
Best MPH 106.79
Best 60' 1.695

Visit my site at:
http://www.geocities.com/cobrar93_2000/MyPage.html

06-22-2001, 06:28 PM	#1
swtstang Registered Member Join Date: Apr 2001 Location: stockton, ca usa Posts: 160	4.10 gears Can Someone with 4.10 gears tell me what rpm they are at in 5th gear at 100mph?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
3.73 v. 4.10 Gears	GTMustang96	Modular Madness	20	03-20-2003 06:36 PM
4.10 Or 4.30 Gears In 8" Rear?	jimijuggernaut	Classic Mustangs	4	02-28-2003 04:33 PM
How good are 4.10 gears and AOD?	KG88GT	Windsor Power	11	02-02-2002 10:34 PM
4.10 GEARS	Blue_99GT	Modular Madness	3	08-29-2001 09:20 AM
whats gears 3.75 or 4.10 with a ZT-5	terrible0ne	Windsor Power	2	03-24-2001 11:07 AM

06-22-2001, 06:33 PM	#2
93CobraR Registered Member Join Date: Oct 1999 Location: Cincinnati, Ohio Posts: 1,575	I pull about 107 in 4th at around 5600, so about 5000 in 5th. ------------------ 87 GT, 4 inch cowl hood,17x9 Cobra R's/255/45's,GT-40 heads,Crane 2031, Edelbrock intake, long tubes headers,h-pipe,Flows,BBK cold air, Mass air,70mm MAF, 1.7's, 1" spacer,underdrive pulleys,Pro 5.0, King Cobra, Adj. fuel Reg., Lakewood Lift Bars,50/50's,subframes, 4.10's. Best time 12.759 Best MPH 106.79 Best 60' 1.695 Visit my site at: http://www.geocities.com/cobrar93_2000/MyPage.html