Front Sway Bar

StreetStang37 · 06-12-2001, 12:51 AM

Will I see a gain and if so about how much by removing the front sway bar? Would I see any gains with street tires or do I need to use stickier tires to see the gain? I already disconnected the sway bar and I do feel the weight shift back but Im not sure if Im really seeing a gain, It might be a figment of my imagination because it feels like a big difference to me.

------------------
1993 Mustang GT - March Ram Air & Pullies, K&N, C&L 73mm MAF, 3.73 Gears, Super Competition Hooker Headers, 2 1/2 in. High Flow H-Pipe & Cat Back, Pro 5.0 Shifter, 16* Timing Advance, 8.5mm MSD Super Cunductor Plug Wires, Romoved front Sway Bar, Pro-Shift Lite, LX lights

slowride90 · 06-12-2001, 02:27 AM

Last year i ran a best of a 14.5 with it. Then at the start of the year i hit a 14.3 so it helped alittle i guess.

------------------
1990 Mustang LX,3:55s w/posi, Mac Headers,Hedderman H-pipe, 2 Chamber flows, E-cam,Edelbrock Peformer Intake, 600 Holy Carb,pullys,Smog Pump taken off,Alum Rad,Hotches Upper and Lower control arms. How that carb get in here on a 1990.

90dpscoupe · 06-12-2001, 04:01 AM

Look at my 60' with this tire size, with the sway (on) i was cutting a 2.1, off i hit 1.9, and finally hit 13.9.

------------------
90 lx coupe: 175k miles, steeda water pump pully, hurst shifter, Mac cold air fenderwell, accel supercoil, ADS chip, aluminum D/S, Black magic fan, 3.27grs.
Best time: 13.9116(on 225/60/15 firehawks)
Best mph: 98.17
Best 60': 1.9607

next mods: subframes, mac h-pipe

06-12-2001, 12:51 AM	#1
StreetStang37 Registered Member Join Date: Dec 2000 Location: San Jose, California USA Posts: 275	Front Sway Bar Will I see a gain and if so about how much by removing the front sway bar? Would I see any gains with street tires or do I need to use stickier tires to see the gain? I already disconnected the sway bar and I do feel the weight shift back but Im not sure if Im really seeing a gain, It might be a figment of my imagination because it feels like a big difference to me. ------------------ 1993 Mustang GT - March Ram Air & Pullies, K&N, C&L 73mm MAF, 3.73 Gears, Super Competition Hooker Headers, 2 1/2 in. High Flow H-Pipe & Cat Back, Pro 5.0 Shifter, 16* Timing Advance, 8.5mm MSD Super Cunductor Plug Wires, Romoved front Sway Bar, Pro-Shift Lite, LX lights

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Front Sway Bar Clamp....	Longball	Windsor Power	3	08-29-2004 08:09 PM
front sway bar	kvaught	Blue Oval Lounge	1	06-23-2003 10:46 PM
front sway bar	kvaught	Windsor Power	1	06-22-2003 03:08 AM
Front sway bar	Ieatcamaros	Windsor Power	14	04-20-2003 10:49 PM
Should I buy (used) Front Sway Bar?	Gautam	Windsor Power	6	01-29-2001 09:34 PM

06-12-2001, 02:27 AM	#2
slowride90 Registered Member Join Date: Dec 2000 Location: Mendota Posts: 96	Last year i ran a best of a 14.5 with it. Then at the start of the year i hit a 14.3 so it helped alittle i guess. ------------------ 1990 Mustang LX,3:55s w/posi, Mac Headers,Hedderman H-pipe, 2 Chamber flows, E-cam,Edelbrock Peformer Intake, 600 Holy Carb,pullys,Smog Pump taken off,Alum Rad,Hotches Upper and Lower control arms. How that carb get in here on a 1990.

06-12-2001, 04:01 AM	#3
90dpscoupe Registered Member Join Date: Jun 2000 Location: sanantonio, Tx, usa Posts: 1,407	Look at my 60' with this tire size, with the sway (on) i was cutting a 2.1, off i hit 1.9, and finally hit 13.9. ------------------ 90 lx coupe: 175k miles, steeda water pump pully, hurst shifter, Mac cold air fenderwell, accel supercoil, ADS chip, aluminum D/S, Black magic fan, 3.27grs. Best time: 13.9116(on 225/60/15 firehawks) Best mph: 98.17 Best 60': 1.9607 next mods: subframes, mac h-pipe