wheel studs-how to?

glxstang · 03-14-2002, 08:51 AM

Hey all, I have these moser 28 spline rear axels that need wheel studs put in? Can someone tell me how that is done? Are they just banged in with a heavy hammer or do I need to have a special tool or maybe a proffesional do it for me.

Thanks as always,
PM

IMPULSERACING · 03-14-2002, 09:09 AM

The moser just press in and out. You should be able to do it with a hammer just dont beat it to hard you don't want to bend anything. If these are for a high powered car you will also want to tac weld them to the axel. Mosers have been know to come lose.

Hope this helps.

drudis · 03-14-2002, 11:34 AM

I had other machining work done (redrill the front hubs for .625 knurl studs...) while I was at it...
But anyways, I _paid_ to get them pressfit in. It was like $2 each to pull out and push in.

03-14-2002, 08:51 AM	#1
glxstang Registered Member Join Date: Feb 2001 Location: Delray Beach, Florida Posts: 97	wheel studs-how to? Hey all, I have these moser 28 spline rear axels that need wheel studs put in? Can someone tell me how that is done? Are they just banged in with a heavy hammer or do I need to have a special tool or maybe a proffesional do it for me. Thanks as always, PM

03-14-2002, 09:09 AM	#2
IMPULSERACING Registered Member Join Date: Dec 1999 Location: chicago,IL,USA Posts: 158	The moser just press in and out. You should be able to do it with a hammer just dont beat it to hard you don't want to bend anything. If these are for a high powered car you will also want to tac weld them to the axel. Mosers have been know to come lose. Hope this helps. __________________ 92' LX Hatch (New Combo Coming Soon) Long-Tubes, Off-road H-Pipe, Pro-Dumps, Auburn Pro, 373:1, Strange Axels c-clip elims, control arms, supersubs, 50/50's, Moroso rear trick springs, no sway bars, 5-Lug Pro-Stars 3 1/2", 8 1/2 26x10.5" MT ET streets, N20 91' LX 5.0 Convertable: CobraR Hood, Cobra Spoiler, Cobra R Rims 2001 Expedition: Brush Guard, Clear Corners, Gen 1 Tail Lites, Carbin Fiber Dash Trim, Billet Aluminum A/C Knobs, Flame Gauges

03-14-2002, 11:34 AM	#3
drudis Moderator Join Date: Dec 1999 Location: Livonia, MI, USA Posts: 1,194	I had other machining work done (redrill the front hubs for .625 knurl studs...) while I was at it... But anyways, I _paid_ to get them pressfit in. It was like $2 each to pull out and push in. __________________ Darius Rudis, Moderator Corner Carvers Delight 1989 Mustang LX - Open Track Car http://www.dariusrudis.com

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
wheel studs	Lightspeed	Classic Mustangs	3	12-26-2002 01:59 PM
Wheel Studs Installation	glxstang	Windsor Power	3	03-27-2002 08:13 AM
wheel studs are evil	father joe	Blue Oval Lounge	1	02-27-2002 10:18 PM
Broken Wheel Studs...	AutoX281	Modular Madness	5	03-26-2001 03:00 PM
Wheel studs	MikeBlackGT	Windsor Power	1	02-10-2001 01:01 PM