wheel studs

Lightspeed · 12-25-2002, 02:47 PM

i need the studs on my car to be longer, but is there somewhere you can buy longer studs?

69fastback · 12-25-2002, 04:40 PM

Summit and Jegs have them.

Lightspeed · 12-25-2002, 08:42 PM

do the studs have to be professionally pressed? or can they be installed at home

Rev · 12-26-2002, 01:59 PM

I've just driven them out and in again with a ball peen hammer, but the rotor or drum needs to be well supported underneath..

Rev

12-25-2002, 02:47 PM	#1
Lightspeed Registered Member Join Date: Mar 2002 Posts: 49	wheel studs i need the studs on my car to be longer, but is there somewhere you can buy longer studs? __________________ 67 coupe, 289 ,c4, bored .40, flat tops, crane powermax cam,edelbrock torker 2 intake, edelbrock perf. 600 cfm carb, accel cleaner, ignitor 2 ignition, hooker comp headers, hooker aerochamber mufflers, H-pipe, b&m 2500 stall, b&m ratchet shifter...and more soon to come....

12-25-2002, 04:40 PM	#2
69fastback IRAQ VET Join Date: Feb 2000 Location: high desert California Posts: 1,480	Summit and Jegs have them. __________________ 428 Cobra Jet SOHC 5.4 3V F-150 96 mystic cobra 91 GT

12-25-2002, 08:42 PM	#3
Lightspeed Registered Member Join Date: Mar 2002 Posts: 49	do the studs have to be professionally pressed? or can they be installed at home __________________ 67 coupe, 289 ,c4, bored .40, flat tops, crane powermax cam,edelbrock torker 2 intake, edelbrock perf. 600 cfm carb, accel cleaner, ignitor 2 ignition, hooker comp headers, hooker aerochamber mufflers, H-pipe, b&m 2500 stall, b&m ratchet shifter...and more soon to come....

12-26-2002, 01:59 PM	#4
Rev Registered Member Join Date: Nov 1998 Location: Houston, Tx. Posts: 3,887	ball peen hammer I've just driven them out and in again with a ball peen hammer, but the rotor or drum needs to be well supported underneath.. Rev __________________ '66 Coupe, 306, 350-375 HP, C-4, 13.07 e.t., 104.8 mph, 1/4 mi. O.B.C. #2 '66 coupe Last edited by Rev; 12-26-2002 at 02:09 PM..

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
turn signal-maybe the whole harness-calling all electricians?	rwhite65	Classic Mustangs	6	07-25-2003 08:40 AM
Wheel Studs Installation	glxstang	Windsor Power	3	03-27-2002 08:13 AM
wheel studs are evil	father joe	Blue Oval Lounge	1	02-27-2002 10:18 PM
Broken Wheel Studs...	AutoX281	Modular Madness	5	03-26-2001 03:00 PM
Wheel studs	MikeBlackGT	Windsor Power	1	02-10-2001 01:01 PM