FRPP A/C Delete

Stang_Crazy · 01-05-2003, 07:35 PM

Ok, I just got finished ripping my a/c out and need to move the power steering pump up to where the a/c compressor was. I have the FRPP delete kit but I didn't get any directions with it?!? I know the silver bracket goes on the cylinder head and the black bracket attaches to the water pump but how do they fit on?? It seems like I've tried to put that silver bracket on in every possible way...but nothing looks right to me... Can anyone give me a hand?

88workcar · 01-06-2003, 05:47 AM

I didn't use any of those routes. I moved the tensioner pully to where the AC was. It has been trouble free for years.

Stang_Crazy · 01-06-2003, 11:55 AM

The tensioner pulley got pitched when the supercharger went on, so technically, mine is sitting on a shelf taking up space

I still can't figure out how these damn brackets go...

rayb · 01-08-2003, 07:47 AM

I have and installed the same kit and it works great. I agree a bit tricky though w/o instructions. I was going to post a picture, but don't have a good one. I'll do my best to describe it in words... 1) Attach the silver bracket to the cylinder head (as you mentioned). The shorter bolts should be used for this. This piece has two "towers" or gussetted protrusions in the middle of the piece. These will be used to mount the PS pump and the slightly longer one should go down. 2) Mount the black bracket to the water pump. Use the existing studs for this with new nuts. Two studs will hold this bracket on and there's a hole in it to clear a another stud in the center of the bracket. This piece is in an S-shape and should be mounted so it sticks out towards the front of the car. 3) Slide the pump up between the silver and black brackets. Use the 2 long bolts provided to screw the pump into the 2 threaded holes in the silver bracket.

Hope this helps. Let me know if you have any questions...

fiveohpatrol · 01-09-2003, 02:02 PM

do these help?

Wow, I really need to clean up that engine bay

01-05-2003, 07:35 PM	#1
Stang_Crazy It's never clean enough! Join Date: Jan 1999 Location: Shaler, PA Posts: 1,542	FRPP A/C Delete Ok, I just got finished ripping my a/c out and need to move the power steering pump up to where the a/c compressor was. I have the FRPP delete kit but I didn't get any directions with it?!? I know the silver bracket goes on the cylinder head and the black bracket attaches to the water pump but how do they fit on?? It seems like I've tried to put that silver bracket on in every possible way...but nothing looks right to me... Can anyone give me a hand? __________________ ~Dan 2001 SVT Lightning 89' GT : Taking up garage space and waiting for a buyer... Rice Hater's Club - Member #11

01-06-2003, 05:47 AM	#2
88workcar Registered Member Join Date: Oct 1999 Location: Pierre Part, La. U.S.A. Posts: 1,850	I didn't use any of those routes. I moved the tensioner pully to where the AC was. It has been trouble free for years. __________________ 88workcar 1988 Mustang LX 342. 417rwhp @ 6800. 28 X 10 ET Drag, 4.30s, 10.69 @ 126.43 1.42 60ft. 11.13 @ 127.7 on BFGs 1.72 60ft Rice Hater # 42 To be old and wise, You must first be young and stupid I'm somewhere in tthe middle.

01-06-2003, 11:55 AM	#3
Stang_Crazy It's never clean enough! Join Date: Jan 1999 Location: Shaler, PA Posts: 1,542	The tensioner pulley got pitched when the supercharger went on, so technically, mine is sitting on a shelf taking up space I still can't figure out how these damn brackets go... __________________ ~Dan 2001 SVT Lightning 89' GT : Taking up garage space and waiting for a buyer... Rice Hater's Club - Member #11

01-08-2003, 07:47 AM	#4
rayb Registered Member Join Date: Sep 2000 Location: Canton, OH Posts: 5	A/C Delete Install I have and installed the same kit and it works great. I agree a bit tricky though w/o instructions. I was going to post a picture, but don't have a good one. I'll do my best to describe it in words... 1) Attach the silver bracket to the cylinder head (as you mentioned). The shorter bolts should be used for this. This piece has two "towers" or gussetted protrusions in the middle of the piece. These will be used to mount the PS pump and the slightly longer one should go down. 2) Mount the black bracket to the water pump. Use the existing studs for this with new nuts. Two studs will hold this bracket on and there's a hole in it to clear a another stud in the center of the bracket. This piece is in an S-shape and should be mounted so it sticks out towards the front of the car. 3) Slide the pump up between the silver and black brackets. Use the 2 long bolts provided to screw the pump into the 2 threaded holes in the silver bracket. Hope this helps. Let me know if you have any questions...

01-09-2003, 02:02 PM	#5
fiveohpatrol I'd rather be basketweaving Join Date: Feb 2000 Location: Indianapolis Posts: 2,551	do these help? Wow, I really need to clean up that engine bay __________________ NMRA O/C 9516 NA pumpgas stickshift 347 10.65@125.6, 6.73@100, 1.41 60ft

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Rear Seat Delete?	5.0L_Of_Fury	Blue Oval Lounge	2	09-21-2006 09:49 AM
90 LX armrest delete!!	Chevyguy	Windsor Power	1	11-01-2001 01:01 PM
a/c and smog delete	DemonGT	Windsor Power	3	05-20-2001 11:39 AM
FRPP wires solid or spiral core???	TEXSN95	Windsor Power	1	04-23-2001 10:23 AM