Chris,
I tested the #30 pin and had 12.1 volts from it with the key in the on position. SHould I dosconnect it and leave it or what? Tha codes I pulled were as follows
#22
#14
Now the 12 and 14 were hard to tell , it was either a 12 and a 2 or a 14. There was a slight pause between 12 and 13, so we didn't know if we should keep counting or start over, if you keep going it is a 14, if you start over then we had a 14 only and a 22 only
Please let me know what is going on. Thanks
__________________
|