Fuel pickup tube
 

I'm running one Holley blue pump on the larger line for the basic motor, and a second Holley blue on the smaller line for the nitrous. The smaller pickup line won't dip as far down into the tank as I'd like it to, would it be possible to clamp a short section of hose to the end?

http://www.kveder.net/mustang/images...el-line-02.jpg

If you have the tank out and everything, what id look into doing is putting a sump into the tank. That way you have 2 full size lines comming out the back of the tank. Competition engineering makes a rear sump that can be soldered in, or aeromotive makes the whole tank. But Id probably go with the kit. then you get all the fuel you need.