MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Windsor Power
Register FAQ Members List Calendar

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 04-18-2007, 09:21 PM   #1
Philossifer
Registered Member
 
Join Date: Apr 2003
Posts: 69
Default Gas Gauge Issue after Fuel Pump Install

I Installed a new High-Volume Fuel pump in my 89 LX and now my gas gauge is acting funny. The needle stays near the full mark for most of the tank of gas, and then quickly drops to empty when there's only a few gallons left in the tank.

Anybody ever have a similar problem?
Thanks,
Phil
Philossifer is offline   Reply With Quote
Old 04-18-2007, 09:36 PM   #2
Dark_5.0
Registered Member
 
Dark_5.0's Avatar
 
Join Date: Apr 2001
Location: Staging lane
Posts: 4,337
Default Re: Gas Gauge Issue after Fuel Pump Install

Quote:
Originally Posted by Philossifer View Post
I Installed a new High-Volume Fuel pump in my 89 LX and now my gas gauge is acting funny. The needle stays near the full mark for most of the tank of gas, and then quickly drops to empty when there's only a few gallons left in the tank.

Anybody ever have a similar problem?
Thanks,
Phil
Yep I had that problem and i had the sending unit for the fuel gauge plugged in backwards.
__________________
92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim.
00' Lightning-Stock
88'CRX-13 second ego killer
Dark_5.0 is offline   Reply With Quote
Old 04-18-2007, 09:52 PM   #3
Philossifer
Registered Member
 
Join Date: Apr 2003
Posts: 69
Default Re: Gas Gauge Issue after Fuel Pump Install

Quote:
Originally Posted by Dark_5.0 View Post
Yep I had that problem and i had the sending unit for the fuel gauge plugged in backwards.
Okay,
Thanks.......I'll check it out!
I'll be shocked if it's something that easy.......
Phil
Philossifer is offline   Reply With Quote
Old 04-20-2007, 09:58 PM   #4
~The Jester~
Rat Killer
 
~The Jester~'s Avatar
 
Join Date: Aug 2002
Location: Cold ass Ohio
Posts: 1,143
Default Re: Gas Gauge Issue after Fuel Pump Install

Plugged in backwards, or FULL ground, ie pinched gauge ground wire.
__________________
d-Con Racing
"Nothing fancy, just 347 inches of RAT POISON!"

MICE need not apply.....

~The Jester~ is offline   Reply With Quote
Old 04-21-2007, 05:42 AM   #5
Philossifer
Registered Member
 
Join Date: Apr 2003
Posts: 69
Default Re: Gas Gauge Issue after Fuel Pump Install

Quote:
Originally Posted by ~The Jester~ View Post
Plugged in backwards, or FULL ground, ie pinched gauge ground wire.
Jester,
Is it easy to pinch the wires when reinstalling the tank! I did the job a couple of years ago so I'm trying to think back...........I don't remember worrying about clearance or pinching wires when I lifted the tank back up.

I hope I didn’t damage anything driving the car that way for so long. Actually it’s been nearly a couple of years since I put the new fuel pump in but I don’t drive the car very much. It’s not a daily driver and it gets stored during the winter months. Hopefully I can get to it one of these weekends since it’s not a big job.

Thanks for the tip about the pinched wires. I’ll definitely inspect those wires when I drop the tank!
Phil
Philossifer is offline   Reply With Quote
Old 04-21-2007, 06:53 AM   #6
~The Jester~
Rat Killer
 
~The Jester~'s Avatar
 
Join Date: Aug 2002
Location: Cold ass Ohio
Posts: 1,143
Default Re: Gas Gauge Issue after Fuel Pump Install

The way that tank is built, and the way it has to go up into the car, it's SUPER easy to pinch the wires, and/or halfway unplug them. I've done it many times myself! Only problem is, you have to drop the tank again to check on them.

Good luck, let us know what you find out.
__________________
d-Con Racing
"Nothing fancy, just 347 inches of RAT POISON!"

MICE need not apply.....

~The Jester~ is offline   Reply With Quote
Old 04-25-2007, 12:10 PM   #7
USMC302
Registered Member
 
USMC302's Avatar
 
Join Date: Apr 2001
Location: Gallatin, Tn
Posts: 1,326
Default Re: Gas Gauge Issue after Fuel Pump Install

Never thought of that, I bought my car about 5 years ago and it's done that same thing ever since, the guys who had it before me put a 255lph pump in. I bet that's what happened.....I was just glad it at least let me know when I had a few gal left!
__________________
USMC302 is offline   Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
fuel gauge install GhettoPop Windsor Power 4 01-23-2004 01:41 PM
air/fuel ratio & volt gauge install smokesix Modular Madness 0 09-25-2003 10:13 PM
Fuel pump install. Lethal5Oh Windsor Power 7 07-17-2002 04:02 PM
Fuel Pump Install RMARIANI Windsor Power 1 10-11-2001 01:18 PM
Fuel Gauge install questions Chipdog Windsor Power 0 08-12-2001 07:06 PM


All times are GMT -5. The time now is 08:35 PM.


SEARCH