MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Windsor Power (http://forums.mustangworks.com/forumdisplay.php?f=8)
-   -   gasket matching intake ports (http://forums.mustangworks.com/showthread.php?t=17100)

matt cook 12-06-2001 03:53 PM

gasket matching intake ports
 
I am porting some E7's (I have finished the exhaust) but am wondering about gasket matching the intake.

My car has the stock cam, 1.7 rockers, and performer rpm. If I match the intake and heads to the intake manifold gasket, will I be going bigger than I need to?

All the porting guides say to gasket match the intake. So thats what I was going by...

I know not to mirror polish the intakes, I am just wondering about size here.

thanks

Fostang 12-06-2001 04:31 PM

Match them both to the gasket. The gasket serves as a template.

matt cook 12-06-2001 07:37 PM

yeah, what I was wondering - on a basically stock setup will I lose intake velocity by going that big? With the setup that I said I had will it hurt or help?

thanks

Fostang 12-07-2001 04:44 PM

Should be fine. Just work harder on the exhaust side.

Good Luck


All times are GMT -5. The time now is 03:01 PM.