MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Windsor Power
Register FAQ Members List Calendar

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 04-01-2002, 02:42 PM   #1
Kamaro Killer
Mustang Enthusiast
 
Kamaro Killer's Avatar
 
Join Date: Mar 2002
Posts: 528
Default how can you tell what size gears you have?

I have the problem with my speedo as most people here, I have bigger gears in the diff, but dont have the speedo gear to let my speedo know that I have bigger gears. I want to buy the right gear for my speedo, but since I bought my car after the gears were installed, I don't know what size the gears are. I'm pretty sure they are 3.73, but I dont want to buy the wrong gear. Is there any way of being able to tell, and if so how?

Last edited by Kamaro Killer; 04-01-2002 at 03:27 PM..
Kamaro Killer is offline   Reply With Quote
Old 04-01-2002, 03:30 PM   #2
DRASTiK
Registered Member
 
DRASTiK's Avatar
 
Join Date: May 2001
Location: Yuma, AZ
Posts: 536
Default

well there are a couple of ways.

1. take your diff cover off and count the teeth on the ring and pinion, and then divide them to come up with the gear ratio.

2. put your car on jack stands with it in gear and make a mark on your driveshaft. Spin one of the rear tires one entire revolution and watch the drive shaft to tell how many revolutions it makes during the one tire revolution. If the driveshaft spins almost four complete times during the tire rotation, then you have 3.73's.
__________________
Dave 88 GT - 13.4@106 on street tires (2.2 60ft)
My Stang

RHC member #75

My stang is FOR SALE!!
DRASTiK is offline   Reply With Quote
Old 04-01-2002, 07:03 PM   #3
GodStang
College Stanger
 
GodStang's Avatar
 
Join Date: May 1999
Location: Aiken,south carolina, usa
Posts: 1,097
Default

It should say on a tag on your axle.
__________________
2003 Sonic Blue Cobra
GodStang is offline   Reply With Quote
Old 04-02-2002, 12:34 AM   #4
PKRWUD
Junior Member
 
PKRWUD's Avatar
 
Join Date: Mar 1999
Location: Ventura, California
Posts: 8,981
Default

Quote:
Originally posted by DRASTiK
2. put your car on jack stands with it in gear and make a mark on your driveshaft. Spin one of the rear tires one entire revolution and watch the drive shaft to tell how many revolutions it makes during the one tire revolution. If the driveshaft spins almost four complete times during the tire rotation, then you have 3.73's.
This works well, but put the tranny in neutral, rather than in gear.

Take care,
-Chris
__________________
Webmaster:
Rice Haters Club
Jim Porter Racing
Peckerwoods Pit Stop


Support Your Local
RED & WHITE!
PKRWUD is offline   Reply With Quote
Old 04-02-2002, 11:40 AM   #5
DRASTiK
Registered Member
 
DRASTiK's Avatar
 
Join Date: May 2001
Location: Yuma, AZ
Posts: 536
Default

Quote:
put the tranny in neutral, rather than in gear

oops. hehe it's been a while since I did this. Didn't mean to mislead you.
DRASTiK is offline   Reply With Quote
Old 04-02-2002, 02:12 PM   #6
Mr 5 0
Conservative Individualist
 
Mr 5 0's Avatar
 
Join Date: May 1997
Location: Wherever I need to be
Posts: 7,487
Lightbulb Name that gear

Quote:
Originally posted by GodStang

It should say on a tag on your axle.
There's also a door tag with a code but if you have aftermarket (non-stock) rear gears, all that information is useless.

Use the 'marked driveshaft/one tire rotation' method to determine rear diff ratios, especially on older Mustangs that very often have aftermarket gears installed as this is a basic Mustang mod.
Mr 5 0 is offline   Reply With Quote
Old 04-03-2002, 02:31 PM   #7
james87gt
Registered Member
 
Join Date: Jan 2002
Posts: 62
Default

i just got done and the driveshaft passed 3 1/2 times what size grears do i have i would think 355 if four full truns is 373
james87gt is offline   Reply With Quote
Old 04-03-2002, 02:55 PM   #8
89 Cobra LX
Don Corlione
 
89 Cobra LX's Avatar
 
Join Date: Jun 2001
Location: Omaha NE USA
Posts: 491
Default

3.5 rotations = 3.55
3.75 rotations = 3.73
4 rotations = 4.10 or possibly a 3.90, but I'm not aware of a 3.90 gear available for the 8.8 rearend.
__________________
Eric - 89 Mustang LX coupe
5 speed 302-Cobra Intake-GT40p heads-TFS stage 1 cam-FRPP 1.6 roller rockers-3:73 gears-KYB shocks and struts-Eibach Pro-kit-HPM Mega-bite upper and lower control arms-FRPP aluminum driveshaft-16x8 Chrome Cobra Rs

R.H.C. #14
89 Cobra LX is offline   Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Gears Gears Gears!!!! COBRAon18s Modular Madness 20 05-13-2002 04:44 PM
wheel size fordkid68 Classic Mustangs 0 03-10-2002 03:28 PM
Gears, need help!!!! Edgar Negron Windsor Power 3 05-27-2001 03:10 PM
Gears Gears Gears Skyman Windsor Power 6 03-11-2001 11:39 PM
Nitto tire size, wheel size, etc. 2FastLX Windsor Power 7 02-15-2001 04:04 AM


All times are GMT -5. The time now is 10:23 AM.


SEARCH