what intakes will fit under stock hood ??

Robert_5_liter · 03-29-2001, 02:48 AM

First time mustang owner and i know ford put a smaller intake on the 1995 model and i want to put a better one on.

Patrick Boetticher · 03-29-2001, 04:18 AM

i have an explorer intake with a 1/2 plenum spacer, i had to notch the center hood support sligtty but it fits and it is HUGE!!!

------------------
PPG Torch Red 95GT, Ported Explorer Intake, E-303 cam, 75mm MAS, BBK Adj. fuel Reg & gauge, BBK Shorty Headers, BBK H-pipe, March Pulleys, 2 Chamber Flowmasters, Kenny Brown 6 point Roll cage, Kenny Brown Panhard Bar, Powerslot Rotors, Eibach Sportline Springs, 180* Thermostat, 1/2 Plenum Spacer, MSD 6AL, MSD Master Blaster, MSD 8.8 Wires, 19# Racing Injectors, AFS 10.5" Cobra R's, Nitto 555's, Eclipse & JL Stereo System... I just sold My K&N, It looks funny with Stock Air Box & filter!!!

CJ's94GT · 03-29-2001, 05:53 PM

I put an Edelbrock Performer on my 94 and only had to trim a square out of the hood insulation so it didn't rest on the front corner of the plenum.

Mustangbelle306 · 03-29-2001, 07:24 PM

I have a Cartech box upper and ported lower, and the previous owner had cut out part of the stock hood, so I guess it fit, but it was messy looking. I'm glad I had a cowl already!

------------------
Elisha (Mustang Chick Extraordinaire)
1994 GT/Saleen: Cartech intake,4.10s, full exhaust, pulleys, Compucar nitrous kit 125 shot
Sold the 1986 LX sedan

http://www.geocities.com/mustangbelle_306
AOL name: GT306Chick

03-29-2001, 02:48 AM	#1
Robert_5_liter Registered Member Join Date: Mar 2001 Location: Ohio, lorain usa Posts: 32	what intakes will fit under stock hood ?? First time mustang owner and i know ford put a smaller intake on the 1995 model and i want to put a better one on.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What are 2001-2002 Cobras Running in the 1/4 Bone Stock?	'02 Cobra Guy	Modular Madness	3	11-08-2001 01:23 AM
Help! Hood won't fit! Cowl hood guys please read!	daveGT	Windsor Power	3	08-21-2001 07:49 AM
Who has 70mm TB bbk and stock hood?	Smokedawg	Windsor Power	4	07-27-2001 09:59 AM
glass hood for 79 stang	drag79stang	Appearance & Detailing	3	02-23-2001 07:16 PM
LT's vs. shorties vs. stock headers	jonnyk	Windsor Power	9	01-01-2001 11:28 AM

03-29-2001, 04:18 AM	#2
Patrick Boetticher Registered Member Join Date: Feb 1999 Location: Camarillo/Thousand Oaks Ca Posts: 223	i have an explorer intake with a 1/2 plenum spacer, i had to notch the center hood support sligtty but it fits and it is HUGE!!! ------------------ PPG Torch Red 95GT, Ported Explorer Intake, E-303 cam, 75mm MAS, BBK Adj. fuel Reg & gauge, BBK Shorty Headers, BBK H-pipe, March Pulleys, 2 Chamber Flowmasters, Kenny Brown 6 point Roll cage, Kenny Brown Panhard Bar, Powerslot Rotors, Eibach Sportline Springs, 180* Thermostat, 1/2 Plenum Spacer, MSD 6AL, MSD Master Blaster, MSD 8.8 Wires, 19# Racing Injectors, AFS 10.5" Cobra R's, Nitto 555's, Eclipse & JL Stereo System... I just sold My K&N, It looks funny with Stock Air Box & filter!!!

03-29-2001, 05:53 PM	#3
CJ's94GT Registered Member Join Date: Feb 2001 Location: Wichita,KS Posts: 59	I put an Edelbrock Performer on my 94 and only had to trim a square out of the hood insulation so it didn't rest on the front corner of the plenum.

03-29-2001, 07:24 PM	#4
Mustangbelle306 Yay for Chickys Join Date: Feb 2001 Posts: 1,532	I have a Cartech box upper and ported lower, and the previous owner had cut out part of the stock hood, so I guess it fit, but it was messy looking. I'm glad I had a cowl already! ------------------ Elisha (Mustang Chick Extraordinaire) 1994 GT/Saleen: Cartech intake,4.10s, full exhaust, pulleys, Compucar nitrous kit 125 shot Sold the 1986 LX sedan http://www.geocities.com/mustangbelle_306 AOL name: GT306Chick