MustangWorks.com : Ford Forums - View Single Post - Got a steal on heads! Will this put me over the top on my fuel system?

Adam94GT · 09-02-2003, 11:01 AM

My heads have 6025 stamped on them, that's Edelbrocks number for the complete 2.02 valve heads. I wasn't going to buy them but after we brought them home and measured them with a caliper we couldn't get the measurement to go over 1.90 no matter how we measured them. Why would 6025 be stamped in them?

Are you guys suggesting I still get a better fuel pump? I think I heard 255lph. And since I'm staying with the stock injectors, will I need to raise my fuel pressure above the stock 40psi? If so I'll need to add an adjustable regulator to my shopping list.

09-02-2003, 11:01 AM	#6
Adam94GT Registered Member Join Date: Jun 2003 Location: O'Fallon, MO Posts: 32	My heads have 6025 stamped on them, that's Edelbrocks number for the complete 2.02 valve heads. I wasn't going to buy them but after we brought them home and measured them with a caliper we couldn't get the measurement to go over 1.90 no matter how we measured them. Why would 6025 be stamped in them? Are you guys suggesting I still get a better fuel pump? I think I heard 255lph. And since I'm staying with the stock injectors, will I need to raise my fuel pressure above the stock 40psi? If so I'll need to add an adjustable regulator to my shopping list. __________________ ----------- Adam M. Bullard 1994 Ford Mustang GT Too many mods since last E.T. http://www.geocities.com/adam94gt Last edited by Adam94GT; 09-02-2003 at 11:20 AM..