Grabber Blue paint on a Fox body
 

Wondering if anyone has pics or atleast even seen of a fox body with a grabber blue paint paint job. I'm pretty sure Im gonna get my car done that color with a black stripe down the hood (like the MaCh1 concept). Thanks.

------------------
1993 Mustang GT - K&N, March Ram Air & Pullies, 73mm C&L MAF, Edelbrock 65mm TB & EGR, 1 5/8in Equal Length Super Competition Hooker Headers, 2 1/2in H-Pipe w/hi-flow cats & Flowmaster 2 1/2in Cat-Back Exhaust, FlowTech Cut-Outs, Nitto DR's, 3.73 gears, Pro 5.0 Shifter, Pro-Shift Lite, 8.5mm MSD Super Cunductor Plug Wires, PowerSlot rotors, PowerMaster 140amp Alt., LX lights, Cobra R hood w/SVO scoop, Saleen spoiler, Cobra Bumper, 3in chrome tips.

I haven't seen one, but that will look great!

------------------
Todd
1995 GT/T-5
Pulleys; 65 mm TB; Flowmaster cat-back; Mac off road H-pipe; FMS aluminum driveshaft; short-throw shifter; HD clutch; Cobra R's; Cobra front and wing

Well, as is, I'm sanding the car and preparing it for paint. I bought the paint and everything I need (paints, clears, reducer, sand papers etc. at a hook up from my older brothers friend at a paint shop for $330). We just need to finish sanding some spots and find a place to rent a booth out so my brother can paint it. I'm doing the paint scheme from the MaCh1 concept. I think it'll look cool. I photoshopped it and it looked nice, just want some real world experience from seeing Grabber Blue in person.

------------------
1993 Mustang GT - K&N, March Ram Air & Pullies, 73mm C&L MAF, Edelbrock 65mm TB & EGR, 1 5/8in Equal Length Super Competition Hooker Headers, 2 1/2in H-Pipe w/hi-flow cats & Flowmaster 2 1/2in Cat-Back Exhaust, FlowTech Cut-Outs, Nitto DR's, 3.73 gears, Pro 5.0 Shifter, Pro-Shift Lite, 8.5mm MSD Super Cunductor Plug Wires, PowerSlot rotors, PowerMaster 140amp Alt., LX lights, Cobra R hood w/SVO scoop, Saleen spoiler, Cobra Bumper, 3in chrome tips.

sounds nice! takes some pictures and post them after, i would like to see the finished product!

------------------
89 GT AOD w/ shift kit, B&M rachet shifter, Trickflow intake, Crane (E-type) cam, 70Tb, 75MAF, 1.6 Rockers, Pulleys, MAC headers and H-pipe, Dynomax mufflers, K&N, 3 core radiator, white face gauges, custom interior, cobra R rims. 14.9 at 95.07mph with stock 2.73's.

89LX 2.3 Notch, daily beater!
MY89GT

I havent seen that color on a fox body but I know a guy that has a Pinto drag car that color. I like that color on anything. I think it'll look great. Post some pics when you get it done.

------------------
'93 lx notch 4 banger (drive it to work currently), Using the 306, 8.8 posi, 4.10's, summit rear cover, elec. fan, cowl hood, wieand stealth intake, holley 650 d.p.carb., built c-4, e-303, full autometer guages, msd box, mallory unilite dist, and coil, roll cage, summit seat, subs, 15x10's in the back with slicks, skinnies up front, all in use for 1988 Hatch Drag Car. Hope to start running next year. Hoping for 7.20's after all is done with small motor.

You can bet I'll post some pics. Just about done sanding. Should I paint the whole spoiler (Saleen spoiler) black like the MaCh1? Not too sure how Im going to do that. Opinions would be helpfull.

------------------
1993 Mustang GT - K&N, March Ram Air & Pullies, 73mm C&L MAF, Edelbrock 65mm TB & EGR, 1 5/8in Equal Length Super Competition Hooker Headers, 2 1/2in H-Pipe w/hi-flow cats & Flowmaster 2 1/2in Cat-Back Exhaust, FlowTech Cut-Outs, Nitto DR's, 3.73 gears, Pro 5.0 Shifter, Pro-Shift Lite, 8.5mm MSD Super Cunductor Plug Wires, PowerSlot rotors, PowerMaster 140amp Alt., LX lights, Cobra R hood w/SVO scoop, Saleen spoiler, Cobra Bumper, 3in chrome tips.

try www.mustangworld.com surf through the pics. i swear i saw a fox body with your blue!

------------------
90 LX Black on Black
Flowbabies, h-pipe, Mac unequal shorties, K&N, Hurst, subframes, Motorsport springs, MSD coil, 3.55's

ttt

------------------
1993 Mustang GT - K&N, March Ram Air & Pullies, 73mm C&L MAF, Edelbrock 65mm TB & EGR, 1 5/8in Equal Length Super Competition Hooker Headers, 2 1/2in H-Pipe w/hi-flow cats & Flowmaster 2 1/2in Cat-Back Exhaust, FlowTech Cut-Outs, Nitto DR's, 3.73 gears, Pro 5.0 Shifter, Pro-Shift Lite, 8.5mm MSD Super Cunductor Plug Wires, PowerSlot rotors, PowerMaster 140amp Alt., LX lights, Cobra R hood w/SVO scoop, Saleen spoiler, Cobra Bumper, 3in chrome tips.