Rear lower control arms

explicitone · 04-22-2002, 05:46 PM

I was looking into getting rear control arms and I am looking at the maximum motorsports and wanted to see what you guys are using and the good/bad about what you are using to help me make up my mind there are to many brands to chose from and I am new to control arms and what to look for
A BIG THANX TO ANY HELP

srv1 · 04-22-2002, 06:53 PM

explicit, Griggs i hear is very good too. pricey though. Darius may be able to help you out on this one

cyberstang5.0 · 04-24-2002, 07:26 AM

I have BBK lower control arms... I have not had any problems with them and they give my the bite I need. They are high quality and a good price. I regret not buying the uppers with the lowers... so I'd suggest getting those too.

drudis · 04-24-2002, 10:53 AM

For street drag-racing type, I would go with the HPMotorsport Megabite SENIORS.
For street handling, go with the MM ones.

If you add a panhard and expect opentrack use, then go with the Griggs.
(had choice #1 and #3 on my own car).

whiterod · 04-24-2002, 11:45 AM

I have the mac upper & lowers, and in addition to nitto's they are an unbeatable match on the street. very good price also

89 Cobra LX · 04-24-2002, 11:49 AM

Quote:

Originally posted by drudis
For street drag-racing type, I would go with the HPMotorsport Megabite SENIORS.
For street handling, go with the MM ones.

If you add a panhard and expect opentrack use, then go with the Griggs.
(had choice #1 and #3 on my own car).

Any reason you don't like the Megabite Juniors?

04-22-2002, 06:53 PM	#2
srv1 Get down..... Join Date: Apr 2001 Location: Room 103 Posts: 2,095	explicit, Griggs i hear is very good too. pricey though. Darius may be able to help you out on this one __________________ Cobra brakes are on! Finally..... ------------------------------------------------

04-24-2002, 10:53 AM	#4
drudis Moderator Join Date: Dec 1999 Location: Livonia, MI, USA Posts: 1,194	For street drag-racing type, I would go with the HPMotorsport Megabite SENIORS. For street handling, go with the MM ones. If you add a panhard and expect opentrack use, then go with the Griggs. (had choice #1 and #3 on my own car). __________________ Darius Rudis, Moderator Corner Carvers Delight 1989 Mustang LX - Open Track Car http://www.dariusrudis.com

04-24-2002, 11:45 AM	#5
whiterod Registered Member Join Date: Sep 2001 Location: zachary, la Posts: 73	I have the mac upper & lowers, and in addition to nitto's they are an unbeatable match on the street. very good price also __________________ GT-40X(58cc)heads, cobra upper&lower, FMS 65mm TB, 75mm Bullet, 24# injectors, 190 lph fuel pump, moroso cold air intake, BBK 1 5/8 equal length headers, flowmaster cat back, 1.7 cobra rockers, crane 2031, T5Z gear box, centerforce dual friction, mcleod bullet proof bellhousing, 3.55 gears, hurst billet shifter with over 193,000 miles. thanks to all who contributed

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Lower control arm bushing	jwhite1993	Windsor Power	9	11-14-2003 09:38 AM
Lower Control Arms Rock!!	StoplightWarrior	Modular Madness	6	08-28-2002 11:53 PM
I'm thinking rear control arms as my next mod, lets talk....	Grn92LX	Windsor Power	3	06-18-2002 09:30 PM
Anyone find Ford's front lower control arms yet?	LOCASH	Windsor Power	3	02-08-2001 09:17 PM
rear control arms	93lx	Windsor Power	2	01-16-2001 06:32 PM

04-22-2002, 05:46 PM	#1
explicitone Registered Member Join Date: Apr 2002 Location: racine ,wi Posts: 691	Rear lower control arms I was looking into getting rear control arms and I am looking at the maximum motorsports and wanted to see what you guys are using and the good/bad about what you are using to help me make up my mind there are to many brands to chose from and I am new to control arms and what to look for A BIG THANX TO ANY HELP __________________ RUN IT STAIGHT AND RUN IT HARD ________ Novi 2000 60' 1.46 1/4 10.67 mph 126.5 _________

04-24-2002, 07:26 AM	#3
cyberstang5.0 347ci of HORSE POWER!!! Join Date: Jul 2001 Location: Houston, TX Posts: 1,416	I have BBK lower control arms... I have not had any problems with them and they give my the bite I need. They are high quality and a good price. I regret not buying the uppers with the lowers... so I'd suggest getting those too.