MustangWorks.com : Ford Forums - View Single Post - Grr, this e303 cam is frustrating in my 95stang

Shogun · 04-05-2003, 12:33 AM

When is the last time you cleaned the IAC? It can build up carbon over time and restrict it's movement or stop it altoghterwhich will adversely affect your idle. You having surging problems I assume. Get a vaccum gague and check your intake manifold vacumm some where close to your T/B. You should have at least 15 inches of vaccum at idle with a E-cam, if not you might have a leak, ANY un-metered air entering the system will confuse the computer and cause idle problems.

04-05-2003, 12:33 AM	#4
Shogun Registered Member Join Date: Feb 2002 Location: Nebraska Posts: 86	When is the last time you cleaned the IAC? It can build up carbon over time and restrict it's movement or stop it altoghterwhich will adversely affect your idle. You having surging problems I assume. Get a vaccum gague and check your intake manifold vacumm some where close to your T/B. You should have at least 15 inches of vaccum at idle with a E-cam, if not you might have a leak, ANY un-metered air entering the system will confuse the computer and cause idle problems. __________________ Proud RHC member #99 1990 Mustang GT Trick Flow heads,F303,Mac cold air,FMS 65mm tb,73mm ma,FMS 1.6,GT-40 intake,MSD igintion,NOS Big Shot@150,Mac equal shorties,Mac h-pipe,American Thunder flows,Centerforce dual friction,TTC 3550,alm drive shaft, 3.73's, HPM subframes, k-member brace, strut tower brace.. amongst others.