View Single Post
Old 12-15-2009, 09:12 PM   #1
suprchrg'dstang
Registered Member
 
suprchrg'dstang's Avatar
 
Join Date: Nov 2001
Location: minnesota
Posts: 9
Default Has spark and fuel pressure, won't fire.

Been awhile since I posted, but the combo has changed a bunch since I started. I just rebuilt the block and added lots of goodies. it is turbocharged now and I had just finished everything(over a month to finish) and had the car running with the old 76mm C&L MAF. My buddys friend is a tuner and flew in from California last week. They were driving it around the block a few times. Well something took a crap. Now the car cranks but wont fire. It does have spark cause I checked that. I can here the fuel pump prime and fill the fuel lines. Timing was set when it was running when I left the car to them. I haven't replaced anything but the spark plugs. I cleaned the distro cap and had the module tested. I mean if it gets a spark then its not electrical is it? I just dont wanna start throwing parts at the car for no reason.

-This car has no emissions
-IAC has less than 5k miles on it
-Fuel pump is Walboro 255lph less than 5k miles
-FMS 42lb injecters less than 2k miles
-Accel 300+ ignition and coil less than 500 miles
-ABACO MAF was sent w/ 42 lbs tune already on it by Anderson FMS

Thanks for any help you can give, I lose sleep over this thing not running...

Last edited by suprchrg'dstang; 12-15-2009 at 10:11 PM..
suprchrg'dstang is offline   Reply With Quote