|
Head porting?
Anyone know of any good websites that show you how to port your own heads and get the materials needed? Any advice will be appreciated.
|
Quote:
Try that. Should help. http://www.fordmuscle.com/archives/2...s/index1.shtml Some flow #'s ------------------ 82 Mercury Capri 302. Comp. Cams Tremec 3550 3.73's 12.8@106 N/AKevin's Capri [This message has been edited by shovelnose (edited 01-15-2001).] |
Here is a great site with some of the best looking ported stock heads i have seen. Just e-mail him, he is very nice and informative and will answer any question you can ask.
Jarrod http://hometown.aol.com/newt56k/myhomepage/auto.html http://hometown.aol.com/newt56k/myhomepage/auto.html go down to the bottom and click on "pics of ported heads" ------------------ 87GT Vortech S-trim, 155intank pump, 24# injectors, 75mm pro-m, cobra intake, exhaust, 3.73's, mega bite jr's, Central coastal mustangs drag springs and some other freebies. |
GO to the standard abrasives web site they have a DYI-Do It Yourself article that is very good has nice clear wording and diagrams, and recomendations on what grit to use when and where
------------------ My Ride Check Out My Site 91GT, Holley SysteMAX II Kit-Heads 2.02" x 1.60",Full MAC exhaust 1-5/8" Long tubes, 2-1/2" O.R H-Pipe, 2 1/2" cat back, 12" K&N Filter, RNH PERFORMANCE Ram Air, Ron Davis Radiator, Full Suspension,3:73's, Welds, Best on new motor-12.60 @ 108, no traction 1.98 |
| All times are GMT -5. The time now is 10:06 PM. |