Headlamps and foglights don't work. Please help with wiring.

gt93mustang · 04-29-2001, 09:34 PM

Well, if its not one thing, its another. I just replaced my head gaskets due to detonation with a blower and when I got everything back together, I found out my headlights don't work anymore. The parking lights still work, but no headlights or foglights. Did I miss a ground somewhere? What should I check for? How could I trace back power from the headlights to the source of the fault? Any help is greatly be appreciated.

------------------
MAC equal length headers, MAC Off-Road H-Pipe, Flowmaster mufflers, 373's, March ram-air kit, underdrive pulleys, 73mm MAF, 75mm TB, Saleen Intake (ported), Edelbrock 6037 heads (ported, polished, 3 angle valve-job 255CFM @.500), 1.6 FMS RR's, Wolverine 1087 Cam, 24lb injectors, MSD 6AL, Subframe connectors, Griggs Adustable Lower Control Arms, Lakewood 50/50 shocks, SSM Upper Control Arms... and probably some more in there I forgot

04-29-2001, 09:34 PM	#1
gt93mustang Registered Member Join Date: Feb 1999 Location: Kennesaw, Georgia, USA Posts: 252	Headlamps and foglights don't work. Please help with wiring. Well, if its not one thing, its another. I just replaced my head gaskets due to detonation with a blower and when I got everything back together, I found out my headlights don't work anymore. The parking lights still work, but no headlights or foglights. Did I miss a ground somewhere? What should I check for? How could I trace back power from the headlights to the source of the fault? Any help is greatly be appreciated. ------------------ MAC equal length headers, MAC Off-Road H-Pipe, Flowmaster mufflers, 373's, March ram-air kit, underdrive pulleys, 73mm MAF, 75mm TB, Saleen Intake (ported), Edelbrock 6037 heads (ported, polished, 3 angle valve-job 255CFM @.500), 1.6 FMS RR's, Wolverine 1087 Cam, 24lb injectors, MSD 6AL, Subframe connectors, Griggs Adustable Lower Control Arms, Lakewood 50/50 shocks, SSM Upper Control Arms... and probably some more in there I forgot