Heads, Injectors, cam?

1BAD89 · 05-05-2001, 11:29 PM

I'm getting ready to buy heads, a cam, injectors and a fuel pump. Do you guys have any suggestions? I am pretty sure all my mods are in my signature If not I'll post them. I was kinda leaning towards Trick flows twisted wedge(sincce i already have the intake), then the cam's i was looking at are either te B303 or the F303, then the injectors I was looking at 24 or 30 #, as far as the fuel pump 150,190, to 255. Any help would be much appreciated. Thanks.

1BAD89 · 05-05-2001, 11:33 PM

Well my mod's didn't show. 3:55's
B & M Ripper Shifter
BBK Off-Road H-pipe
BBK jet-hot coated equal length shorty headers
BBK 70mm Throttle Body
BBK cold air induction (fenderwell mount)
BBK adjustable clutch quadrant
C & L 76mm Mass air meter
Cobra R's 17x9 w/ 245's
Trick Flow Intake
Flowmaster Force II exhaust system
Autometer 5" tach w/ shift lite
Super Duty T5
Centerforce II Clutch
Heavy Duty Radiator
9mm Ford racing plug wires
Accel cap and Rotor

Idhomustang · 05-05-2001, 11:34 PM

Cam is your choice, heads AFR 165 or 185cc
58cc, fuel pump 190lph. Can should be in the 228/238 range with at least .540 to .550 range. AFR will ask this when ordering heads.
I went with a set setup for .600 room to grow..Hehehe
O just by a Holley systemax kit, it will do the same thing..

1BAD89 · 05-05-2001, 11:46 PM

Where is the best place to buy the heads?

05-05-2001, 11:29 PM	#1
1BAD89 Tubbed and Juiced Join Date: Mar 2001 Location: Tulsa, Oklahoma Posts: 1,861	Heads, Injectors, cam? I'm getting ready to buy heads, a cam, injectors and a fuel pump. Do you guys have any suggestions? I am pretty sure all my mods are in my signature If not I'll post them. I was kinda leaning towards Trick flows twisted wedge(sincce i already have the intake), then the cam's i was looking at are either te B303 or the F303, then the injectors I was looking at 24 or 30 #, as far as the fuel pump 150,190, to 255. Any help would be much appreciated. Thanks.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ported e7's?	bailey_57	Windsor Power	28	07-15-2004 07:54 PM
differences in injectors?	'89GTStang	Windsor Power	9	06-06-2003 02:39 AM
Heads	Rosco	Windsor Power	1	03-16-2002 09:13 AM
What kind of Windsor heads?	vetteeatr	Windsor Power	11	10-28-2001 03:43 AM
For whoever it was considering using stock ported heads	2FastLX	Windsor Power	5	10-11-2001 01:53 PM

05-05-2001, 11:33 PM	#2
1BAD89 Tubbed and Juiced Join Date: Mar 2001 Location: Tulsa, Oklahoma Posts: 1,861	Well my mod's didn't show. 3:55's B & M Ripper Shifter BBK Off-Road H-pipe BBK jet-hot coated equal length shorty headers BBK 70mm Throttle Body BBK cold air induction (fenderwell mount) BBK adjustable clutch quadrant C & L 76mm Mass air meter Cobra R's 17x9 w/ 245's Trick Flow Intake Flowmaster Force II exhaust system Autometer 5" tach w/ shift lite Super Duty T5 Centerforce II Clutch Heavy Duty Radiator 9mm Ford racing plug wires Accel cap and Rotor

05-05-2001, 11:34 PM	#3
Idhomustang Registered Member Join Date: Sep 1999 Location: boise,idaho Posts: 220	Cam is your choice, heads AFR 165 or 185cc 58cc, fuel pump 190lph. Can should be in the 228/238 range with at least .540 to .550 range. AFR will ask this when ordering heads. I went with a set setup for .600 room to grow..Hehehe O just by a Holley systemax kit, it will do the same thing..

05-05-2001, 11:46 PM	#4
1BAD89 Tubbed and Juiced Join Date: Mar 2001 Location: Tulsa, Oklahoma Posts: 1,861	Where is the best place to buy the heads?