I am running a brand new water pump with all new hoses with radiator. I run 50/50 mix water, antifreeze. This motor just got put back together not to long ago (approx. 3 months) by a pro machine shop man. All right gaskets where used. My temp just flucuates. With the gutted thermo-driving down the highway at say 55 the damn thing runs 130-140..Mostly stop and go it stays close to 210...but as soon as i stop for a few minutes at idle..it just keeps shooting up..i know boring cut the waterjackets closer..and all bored motors run a hotter than normal..
------------------
347 Stroker Motor: Balanced, A9P Computer, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, 30lb Bosch Injectors, Holley Fuel Regulator, March Underdrive Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 79mm Mass Air Unit, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Short Throw Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors
|