help with 302

lbrew4 · 04-04-2007, 03:07 PM

i have a 1988 ford gt. the 3/8 rubber line off the back of the upper intake broke in half, i can not find the other end. can anybody tell me where it goes?
thanksw larry

1989GT · 04-05-2007, 08:52 AM

It goes to the pcv valve. It's in the back of the lower intake.

lbrew4 · 04-05-2007, 02:20 PM

the 3/8 line goes to the pcv. got it, now the 1/4 line goes where? the front part of the line goes to the can at the bottom of the frame, and the back goes where? that is the one i lost. i was wrong on the size before.
thanks
larry

USMC302 · 04-09-2007, 03:28 PM

This should help. one of the lines from the vacuum tree should be going to the Fuel pressure regulator, is that on there? one should be going to the MAP sensor, is that one there? Hope this helps....

USMC302 · 04-12-2007, 11:14 AM

the one coming off the end of the intake and not off the vacuum tree should go to the vacuum tree on the firewall. let us know if you found it.

lbrew4 · 04-19-2007, 10:53 PM

it was the 1/4 going to the map. i would never have found it. the connection was behind the air cond hose. i have it going again and have been enjoying the ride. thanks to you.
larry

04-04-2007, 03:07 PM	#1
lbrew4 lbrew4 Join Date: Apr 2007 Location: AMARILLO Posts: 5	help with 302 i have a 1988 ford gt. the 3/8 rubber line off the back of the upper intake broke in half, i can not find the other end. can anybody tell me where it goes? thanksw larry

04-05-2007, 08:52 AM	#2
1989GT Registered Member Join Date: Apr 1999 Location: Cincinnati,OH Posts: 1,511	Re: help with 302 It goes to the pcv valve. It's in the back of the lower intake. __________________ 89GT,Pro-Bullet 306, H/C/I and a bunch of other stuff. Sold 00GT, Vortech S-Trim, Steeda Boost Pipe, C&L intake, Mac off-road H-pipe, Flowmasters, B&M Ripper shifter, Eibach Sportline springs, Koni Struts/shocks, MM full length subframe connectors, Cobra brakes, 3.73's. My Car Domain Page

04-05-2007, 02:20 PM	#3
lbrew4 lbrew4 Join Date: Apr 2007 Location: AMARILLO Posts: 5	Re: help with 302 the 3/8 line goes to the pcv. got it, now the 1/4 line goes where? the front part of the line goes to the can at the bottom of the frame, and the back goes where? that is the one i lost. i was wrong on the size before. thanks larry

04-09-2007, 03:28 PM	#4
USMC302 Registered Member Join Date: Apr 2001 Location: Gallatin, Tn Posts: 1,326	Re: help with 302 This should help. one of the lines from the vacuum tree should be going to the Fuel pressure regulator, is that on there? one should be going to the MAP sensor, is that one there? Hope this helps.... __________________

04-12-2007, 11:14 AM	#5
USMC302 Registered Member Join Date: Apr 2001 Location: Gallatin, Tn Posts: 1,326	Re: help with 302 the one coming off the end of the intake and not off the vacuum tree should go to the vacuum tree on the firewall. let us know if you found it. __________________

04-19-2007, 10:53 PM	#6
lbrew4 lbrew4 Join Date: Apr 2007 Location: AMARILLO Posts: 5	Re: help with 302 it was the 1/4 going to the map. i would never have found it. the connection was behind the air cond hose. i have it going again and have been enjoying the ride. thanks to you. larry