MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Windsor Power
Register FAQ Members List Calendar Mark Forums Read

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 10-30-2004, 08:40 PM   #1
cop-coupe
Registered Member
 
Join Date: Apr 1999
Location: belleville IL.
Posts: 60
Unhappy help with c-4 linkage adj.

The C-4 I have mated to my new 306 is wanting to creep and as far as I can tell it is in park, by pushing the shift lever on the trans. is the way the lever placement opposit of an a.o.d. or am I missing somthing..
__________________
1990 spec. serv. coupe w/306 (Indy Perf. Mustang Not Recomended), C-4 w/3000 stall, b-303, gt-40 heads and intake, 1.6rr, 1" spacer, fms valve covers, mac cold air intake, bbk equil shorties, Mac pro chamber, 2.5" flows, under drives, 65mm t.b. , fms 9mm wires, trunck mount battery, 24lb inj., 73mm C&L, 155lph pump. msd digital 6a, flex-a-lite,
cop-coupe is offline   Reply With Quote
Old 11-04-2004, 08:35 PM   #2
82 GT
Import Slayer
 
82 GT's Avatar
 
Join Date: May 1999
Posts: 2,241
Default Re: help with c-4 linkage adj.

It sounds like your linkage needs adjusted. The bottom half of the shifter lever(where the cable attaches) should be all the way forward when it's in PARK(towards the front of the car)....and the exact opposite for LOW 1.(towards the back of the car)

It's easier if you have someone in the car working the shifter so you can make sure the shifter position and lever position are in sync.
It took me awhile to get it right when I put my engine/tranny back into the car. I must have made 20 trips between under the car and in the car.
__________________
'82 GT 351W (.060)Comp Cams 274* Extreme Energy cam, ported & polished heads w/ 1.94/1.60 valves 10.3:1 flat top pistons,stealth intake, Mallory dizzy,Holley 750dp carb, BBK shorties,Flowmaster exhaust,C-4 with 3700 stall converter, B&M pro shifter,8.8 rear, 4:10's, subframes, electric fan, powermaster alternator, 4 core radiator.
82 GT is offline   Reply With Quote
Reply


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
'65 Kickdown Linkage Vitriol Classic Mustangs 0 08-08-2002 12:38 AM
AOD kickdown (TV linkage)...where to get one? 84_GT350 Windsor Power 2 06-16-2001 09:55 AM
Cable clutch swap for old mechanical linkage, any ideas? Giddy Up Classic Mustangs 6 10-28-2000 10:25 AM
4 speed toploader with Hurst Linkage gofishing Classic Mustangs 1 10-27-1999 10:52 PM
Kick down linkage Midnite Wrider Classic Mustangs 2 08-09-1999 04:14 PM


All times are GMT -5. The time now is 01:38 AM.


SEARCH