$ Help finding 347 stroker kit! $

Five0 · 06-06-2001, 12:27 AM

I need help finding the best price on a stroker kit with a forged steel crank (4340).
I am looking for the whole rotating assembly.

I have a friend who is going to help me build the motor for free.

Any help is greatly appreciated.

------------------
James Cox
nochevy@hotmail.com
1991 Mustang LX
12.565 @109.38mph 1.764 60ft

WADS56 · 06-06-2001, 01:32 AM

I got mine from "modernmustang.com" It is the eagle stroker kit with crank (forged or cast), H-beam rods, Je pistons (pop ups or dished), je file fit rings. Exellent quality!

------------------
347 W/ A-trim 6#'s, Canfield heads, out of the box Systemax II intake, solid roller cam. 11.1 @123mph 1.46 60FT

93lx 5.0 daily driver
MY CAR http://www.mustangworks.com/cgi-bin/...splay.cgi?1288

84_GT350 · 06-06-2001, 02:24 AM

Summit and Speed-o-motive have pretty good prices on their kits as well.

------------------
1984 1/2 GT350 (#842 Hatchback w/ T-tops), 302HO, Comp cams Xtreme Energy cam, Carter 625cfm carb, Weiand Stealth intake, MSD distributor, MSD coil, FMS 9mm wires, 1 5/8" MAC unequal shorties, 2 1/2" MAC Prochamber H-pipe, Flowmaster 2 chambers, KYBs, 16"x8" 4 lug Cobra Rs, Falken 245/45ZR16s

Smokedawg · 06-07-2001, 10:42 AM

I bought my pieces individually. Automotion located in Indianapolis Indiana has great prices and will prob ship to you. Such as eagle forged rods for only 319..I think about 500 in forged pistons..What kind of heads and intake are u going to run?? Good Luck

------------------
347 Stroker Motor: Balanced, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, 30lb Bosch Injectors, Holley AFPR, March Underdrive Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 73mm Vortech MAF, 70mm TB, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, AC del, rear seat del.

Five0 · 06-07-2001, 09:38 PM

I am getting the 347 kit that excessive motorsports sells because they screwed up one of my orders really bad so they are giving me a really good deal on the kit; better than I could find anywhere else.

The kit comes with a 5140 steel crank and 4340 H-beam rods, ect.

What is the difference between 5140 and 4340 steel?

I will be running canfields heads with race port work and a performer rpm intake and a 750 carb.
Do you think I should run a victor jr. intake or the performer rpm intake?
I will only be turning it to about 6000 rpm.

My compression will be 10.9-1.

------------------
James Cox
nochevy@hotmail.com
1991 Mustang LX
12.565 @109.38mph 1.764 60ft

WADS56 · 06-07-2001, 11:18 PM

Victor jr. by a long shot.

Five0 · 06-08-2001, 07:16 AM

Won't the vic jr. be a little too much for only turning 6000 rmp's?

------------------
James Cox
nochevy@hotmail.com
1991 Mustang LX
12.565 @109.38mph 1.764 60ft

Five0 · 06-08-2001, 08:21 PM

anyone?

06-06-2001, 12:27 AM	#1
Five0 Registered Member Join Date: Apr 2000 Location: middleburg, fl, usa Posts: 1,134	$ Help finding 347 stroker kit! $ I need help finding the best price on a stroker kit with a forged steel crank (4340). I am looking for the whole rotating assembly. I have a friend who is going to help me build the motor for free. Any help is greatly appreciated. ------------------ James Cox nochevy@hotmail.com 1991 Mustang LX 12.565 @109.38mph 1.764 60ft

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Building a stroker motor	Mustang_289	Windsor Power	4	02-17-2005 12:46 PM
Blown Stroker Computer Help	RabidPony	Modular Madness	10	02-07-2004 11:56 PM
'super' stroker vs 'budget' stroker	mike5p01	Windsor Power	4	10-11-2003 10:11 PM
Decided to build a stroker, but where do I start?	WhiteLX	Windsor Power	5	12-16-2002 10:35 AM
stroker engine question	82 GT	Windsor Power	1	06-08-2001 03:22 PM

06-06-2001, 01:32 AM	#2
WADS56 gear banger Join Date: Aug 2000 Location: CHICAGO Posts: 1,144	I got mine from "modernmustang.com" It is the eagle stroker kit with crank (forged or cast), H-beam rods, Je pistons (pop ups or dished), je file fit rings. Exellent quality! ------------------ 347 W/ A-trim 6#'s, Canfield heads, out of the box Systemax II intake, solid roller cam. 11.1 @123mph 1.46 60FT 93lx 5.0 daily driver MY CAR http://www.mustangworks.com/cgi-bin/...splay.cgi?1288

06-06-2001, 02:24 AM	#3
84_GT350 Registered Member Join Date: Apr 1999 Location: Overland Park, KS, USA Posts: 1,631	Summit and Speed-o-motive have pretty good prices on their kits as well. ------------------ 1984 1/2 GT350 (#842 Hatchback w/ T-tops), 302HO, Comp cams Xtreme Energy cam, Carter 625cfm carb, Weiand Stealth intake, MSD distributor, MSD coil, FMS 9mm wires, 1 5/8" MAC unequal shorties, 2 1/2" MAC Prochamber H-pipe, Flowmaster 2 chambers, KYBs, 16"x8" 4 lug Cobra Rs, Falken 245/45ZR16s

06-07-2001, 10:42 AM	#4
Smokedawg Tires Fear Me... Join Date: Jan 2001 Posts: 867	I bought my pieces individually. Automotion located in Indianapolis Indiana has great prices and will prob ship to you. Such as eagle forged rods for only 319..I think about 500 in forged pistons..What kind of heads and intake are u going to run?? Good Luck ------------------ 347 Stroker Motor: Balanced, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, 30lb Bosch Injectors, Holley AFPR, March Underdrive Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 73mm Vortech MAF, 70mm TB, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, AC del, rear seat del.

06-07-2001, 09:38 PM	#5
Five0 Registered Member Join Date: Apr 2000 Location: middleburg, fl, usa Posts: 1,134	I am getting the 347 kit that excessive motorsports sells because they screwed up one of my orders really bad so they are giving me a really good deal on the kit; better than I could find anywhere else. The kit comes with a 5140 steel crank and 4340 H-beam rods, ect. What is the difference between 5140 and 4340 steel? I will be running canfields heads with race port work and a performer rpm intake and a 750 carb. Do you think I should run a victor jr. intake or the performer rpm intake? I will only be turning it to about 6000 rpm. My compression will be 10.9-1. ------------------ James Cox nochevy@hotmail.com 1991 Mustang LX 12.565 @109.38mph 1.764 60ft

06-07-2001, 11:18 PM	#6
WADS56 gear banger Join Date: Aug 2000 Location: CHICAGO Posts: 1,144	Victor jr. by a long shot.

06-08-2001, 07:16 AM	#7
Five0 Registered Member Join Date: Apr 2000 Location: middleburg, fl, usa Posts: 1,134	Won't the vic jr. be a little too much for only turning 6000 rmp's? ------------------ James Cox nochevy@hotmail.com 1991 Mustang LX 12.565 @109.38mph 1.764 60ft

06-08-2001, 08:21 PM	#8
Five0 Registered Member Join Date: Apr 2000 Location: middleburg, fl, usa Posts: 1,134	anyone?