$ Help finding 347 stroker kit! $
 

I need help finding the best price on a stroker kit with a forged steel crank (4340).
I am looking for the whole rotating assembly.

I have a friend who is going to help me build the motor for free.

Any help is greatly appreciated.


------------------
James Cox
nochevy@hotmail.com
1991 Mustang LX
12.565 @109.38mph 1.764 60ft

I got mine from "modernmustang.com" It is the eagle stroker kit with crank (forged or cast), H-beam rods, Je pistons (pop ups or dished), je file fit rings. Exellent quality!

------------------
347 W/ A-trim 6#'s, Canfield heads, out of the box Systemax II intake, solid roller cam. 11.1 @123mph 1.46 60FT

93lx 5.0 daily driver
MY CAR http://www.mustangworks.com/cgi-bin/...splay.cgi?1288

Summit and Speed-o-motive have pretty good prices on their kits as well.

------------------
1984 1/2 GT350 (#842 Hatchback w/ T-tops), 302HO, Comp cams Xtreme Energy cam, Carter 625cfm carb, Weiand Stealth intake, MSD distributor, MSD coil, FMS 9mm wires, 1 5/8" MAC unequal shorties, 2 1/2" MAC Prochamber H-pipe, Flowmaster 2 chambers, KYBs, 16"x8" 4 lug Cobra Rs, Falken 245/45ZR16s

I bought my pieces individually. Automotion located in Indianapolis Indiana has great prices and will prob ship to you. Such as eagle forged rods for only 319..I think about 500 in forged pistons..What kind of heads and intake are u going to run?? Good Luck

------------------
347 Stroker Motor: Balanced, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, 30lb Bosch Injectors, Holley AFPR, March Underdrive Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 73mm Vortech MAF, 70mm TB, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, AC del, rear seat del.

I am getting the 347 kit that excessive motorsports sells because they screwed up one of my orders really bad so they are giving me a really good deal on the kit; better than I could find anywhere else.

The kit comes with a 5140 steel crank and 4340 H-beam rods, ect.

What is the difference between 5140 and 4340 steel?

I will be running canfields heads with race port work and a performer rpm intake and a 750 carb.
Do you think I should run a victor jr. intake or the performer rpm intake?
I will only be turning it to about 6000 rpm.

My compression will be 10.9-1.


------------------
James Cox
nochevy@hotmail.com
1991 Mustang LX
12.565 @109.38mph 1.764 60ft

Victor jr. by a long shot.

Won't the vic jr. be a little too much for only turning 6000 rmp's?

------------------
James Cox
nochevy@hotmail.com
1991 Mustang LX
12.565 @109.38mph 1.764 60ft

anyone?