Wheel Widening?

cad614 · 12-14-2001, 06:54 AM

Well I've decided I want to send my 98 Cobra rims off to get widened to 10½". The problem is I only know of one company that can do this. Here's their site.
Before I send them off I wanted to see if there were any other companys that offered the same services, and perferably one in TX. I haven't heard this topic brought up before, so reguardless of how it turns out I'll keep everyone posted on the results.

PKRWUD · 12-15-2001, 08:52 AM

That used to be the trick set-up in street racing, but we always found a good welder and had him do it. I'm not aware of anybody who does it these days, but I'm sure they exist. You might try calling machine shops in your area, and asking if they know of someone.

Take care,
-Chris

cad614 · 12-15-2001, 10:14 PM

I've been asking around my local area for quite some time now, but no one seems to know of anyone that can do this. I'll keep searching, and thanks for taking the time to reply.

12-14-2001, 06:54 AM	#1
cad614 Senior Member Join Date: Apr 1999 Location: San Angelo, TX Posts: 377	Wheel Widening? Well I've decided I want to send my 98 Cobra rims off to get widened to 10½". The problem is I only know of one company that can do this. Here's their site. Before I send them off I wanted to see if there were any other companys that offered the same services, and perferably one in TX. I haven't heard this topic brought up before, so reguardless of how it turns out I'll keep everyone posted on the results. __________________ Mike '95 GT Convertible

12-15-2001, 08:52 AM	#2
PKRWUD Junior Member Join Date: Mar 1999 Location: Ventura, California Posts: 8,981	That used to be the trick set-up in street racing, but we always found a good welder and had him do it. I'm not aware of anybody who does it these days, but I'm sure they exist. You might try calling machine shops in your area, and asking if they know of someone. Take care, -Chris __________________ Webmaster: Rice Haters Club Jim Porter Racing Peckerwoods Pit Stop Support Your Local RED & WHITE!

12-15-2001, 10:14 PM	#3
cad614 Senior Member Join Date: Apr 1999 Location: San Angelo, TX Posts: 377	I've been asking around my local area for quite some time now, but no one seems to know of anyone that can do this. I'll keep searching, and thanks for taking the time to reply. __________________ Mike '95 GT Convertible

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
turn signal-maybe the whole harness-calling all electricians?	rwhite65	Classic Mustangs	6	07-25-2003 08:40 AM
Steering Wheel Swap	mw2934	Windsor Power	5	09-20-2002 06:02 AM
Airbag steering wheel	VeNuM	Windsor Power	0	06-19-2002 02:24 PM
Steering wheel swap?	Mustangbelle306	Windsor Power	0	12-10-2001 02:14 AM
steering wheel removal	Hotelbldr	Classic Mustangs	1	01-29-2000 11:21 AM