You don't have any backlash in your gears. You should have between .006 and .012 backlash and if there isn't any you can't turn the gears. You need to remove some shim from the carrier side and put it on the other side. Make sure you don't have the shims behind the bearings switched.
__________________
89 GT convertible, Kenny Brown level 5, Edelbrock performer, AFR 165's, Comp cams XE270HR, C&L 76, 24# inj, Crane 1.7's, 70mm BBK throttle body 298.2 hp 328.2 tq Mustang dyno
"Our lady of blessed acceleration don't fail me now" Elwood Blues
|