MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Windsor Power (http://forums.mustangworks.com/forumdisplay.php?f=8)
-   -   (help) timing ?????????????????? (http://forums.mustangworks.com/showthread.php?t=6563)

Robert_5_liter 10-28-2001 05:03 PM
(help) timing ??????????????????
 
I Checked the timing on my 95 cobra today and i removed the spout connector like i should and checked and it only showed 4 Degrees inital timing it has never been changed since new where should it be set to?????????????????????????? (WTF) I thought they were supposed to be set at 10 Degrees initial.

Rob

GA. BOY 10-28-2001 06:32 PM
10-12 degrees initial is about right rob. that should give you 30-34 total.

------------------
81 fox body
302
7.56 1/8 @ 88mph
1.58 60 ft.

lx mike 10-28-2001 09:07 PM
it is supposed to be but sometime it isn't as you have found out bumb it to about 12-14 and see how it runs then.

------------------
Mike's LX

stanger8172 10-28-2001 10:25 PM
I have mine set at 13 and it can't idle any lower than 1000rpm's.

------------------
'91 LX convertible , T-5,Centerforce Dual Friction, FMS adjustable cable w/quadrant, ported/polished/milled E7 heads, 1.6rr, 1.94/1.60 stainless valves, BBK 1 5/8" equal length shorties, 2 1/2" off road H-pipe, Summit 2 1/2" catback, March Performance Pulleys and A/C Eliminator


All times are GMT -5. The time now is 08:15 PM.