Hidden/stealth nitrous install

RPM427 · 06-25-2002, 08:14 AM

Does anyone know of any tech articles explaining how to install a nitrous kit (Nitrous express/TNT/nitrous works) so its hidden? I've found a few for F-bodies but no stangs

I can prob figure out the soleniods but have no idea where to mount the 10 lbs bottle. Any ideas?:

BTW, I'm looking for a wet system thats around a 50-150 shot.

BilLster · 06-25-2002, 09:34 AM

unless you open the trunk for them ,just haveing the tonne cover down. should do it. but if its a real concern take the spare out and mount it in the spare wheel well.use a 5lb bottle.

i once thought of building a fake sub box for my bottle but it doesnt get much use now adays.

just put the box over it i thought.

RPM427 · 06-25-2002, 11:40 AM

can I mount 2 - 5 lbs bottles in the spare tire area?

If so, how can I plumb everything?

Rick 91GT · 06-25-2002, 01:01 PM

If you go to a direct port Nitrous system you can hide the nozzles and lines under the lower intake, and hide the solidnoids in the cowl. The bottle needs to be on an angle so they syphon well. A buddy of mine does use a old speaker box to hide his, one 10lb bottle fits nicely.

juiceman · 06-25-2002, 07:18 PM

there are alot of ways to hide a nitrous sytem. use a gym bag, a tool box, speaker box etc. plumbing is always the hard part since its hard to hide the main feed line and or plate. if you can afford to buy small bottles that would be a good way to go. as for plumbing or setup if you need help or want and pointers give me a call, i go out near you alot so ill be happy to help you out in the right direction. 917-662-2130 scott. later

RPM427 · 06-26-2002, 07:33 AM

Running the main feed line is not a problem. I'm going to run it through the interoir, under the carpet near the door channel.

I am probably going to just keep the cover over the trunk, and hope no one asks me to pop it.

LX XLR8R · 06-26-2002, 12:10 PM

in a gym back on the back seats

..behind the dash(car has to be gutted) ,

you can hide 10 16oz bottles built into the passenger seat and have a 3 stage graphed actiavation setup..<sarcasm>

06-25-2002, 08:14 AM	#1
RPM427 Registered Member Join Date: Aug 2001 Location: Huntington NY Posts: 573	Hidden/stealth nitrous install Does anyone know of any tech articles explaining how to install a nitrous kit (Nitrous express/TNT/nitrous works) so its hidden? I've found a few for F-bodies but no stangs I can prob figure out the soleniods but have no idea where to mount the 10 lbs bottle. Any ideas?: BTW, I'm looking for a wet system thats around a 50-150 shot. __________________ -1993 Mustang, 900rwhp 03-04 cobra based 4v swap, full Griggs setup, project underway -1994 Ranger w/ 427cid windsor (daily beater) check it out!

06-25-2002, 09:34 AM	#2
BilLster Registered Member Join Date: Oct 2000 Location: Ontario canada Posts: 446	unless you open the trunk for them ,just haveing the tonne cover down. should do it. but if its a real concern take the spare out and mount it in the spare wheel well.use a 5lb bottle. i once thought of building a fake sub box for my bottle but it doesnt get much use now adays. just put the box over it i thought. __________________ 89 with 331 t3'/t4 hybrids. upr Suspention worked out finnaly . 9.89 144 mph .

06-25-2002, 11:40 AM	#3
RPM427 Registered Member Join Date: Aug 2001 Location: Huntington NY Posts: 573	can I mount 2 - 5 lbs bottles in the spare tire area? If so, how can I plumb everything? __________________ -1993 Mustang, 900rwhp 03-04 cobra based 4v swap, full Griggs setup, project underway -1994 Ranger w/ 427cid windsor (daily beater) check it out!

06-25-2002, 01:01 PM	#4
Rick 91GT Procharged! Join Date: May 1999 Location: Hanover, PA Posts: 1,539	If you go to a direct port Nitrous system you can hide the nozzles and lines under the lower intake, and hide the solidnoids in the cowl. The bottle needs to be on an angle so they syphon well. A buddy of mine does use a old speaker box to hide his, one 10lb bottle fits nicely. __________________ *D/R 10108 NMRA Drag Radial, 25.5 chassis, F1R* *Check out RNH Performance Performance Engines and Custom Fabrication.* *From Mild to Wild we can build what you want, when you want it.* FOR SALE Stainless Steel Torque Box Supports

06-26-2002, 07:33 AM	#6
RPM427 Registered Member Join Date: Aug 2001 Location: Huntington NY Posts: 573	Running the main feed line is not a problem. I'm going to run it through the interoir, under the carpet near the door channel. I am probably going to just keep the cover over the trunk, and hope no one asks me to pop it. __________________ -1993 Mustang, 900rwhp 03-04 cobra based 4v swap, full Griggs setup, project underway -1994 Ranger w/ 427cid windsor (daily beater) check it out!

06-25-2002, 07:18 PM	#5
juiceman Registered Member Join Date: Jan 2001 Location: ny Posts: 197	there are alot of ways to hide a nitrous sytem. use a gym bag, a tool box, speaker box etc. plumbing is always the hard part since its hard to hide the main feed line and or plate. if you can afford to buy small bottles that would be a good way to go. as for plumbing or setup if you need help or want and pointers give me a call, i go out near you alot so ill be happy to help you out in the right direction. 917-662-2130 scott. later

06-26-2002, 12:10 PM	#7
LX XLR8R Dirk Diggler Join Date: Feb 1999 Location: SLOATSBURG, NY Posts: 1,931	in a gym back on the back seats ..behind the dash(car has to be gutted) , you can hide 10 16oz bottles built into the passenger seat and have a 3 stage graphed actiavation setup..<sarcasm> __________________ 95 undecided cubes, AFR 185s,undecided cam, undecided intake, and a 150 hit 89 "turbonotch" 2.3T You might want to hold on..i saw this on a cartoon once

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Comments on this Nitrous System	93boss	Windsor Power	3	03-20-2002 05:19 PM
nitrous install question	NotchJohnson	Windsor Power	0	03-02-2002 01:08 PM
WOO HOO! RAN NITROUS AT TRACK! (long, real long)	bark3rd	Modular Madness	26	08-20-2001 08:05 AM
I need a crash course in NITROUS ED	Dark_5.0	Windsor Power	7	07-12-2001 06:03 PM
Nitrous Install	97 Aztec	Modular Madness	1	04-26-2000 10:30 PM