MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Windsor Power
Register FAQ Members List Calendar

Notices


Poll: Whicj heads for my new 306?
Poll Options
Whicj heads for my new 306?

Reply
 
Thread Tools Rating: Thread Rating: 1 votes, 5.00 average. Display Modes
Old 12-26-2001, 04:39 PM   #21
Stang Runner
Registered Member
 
Stang Runner's Avatar
 
Join Date: Jun 1999
Location: Walker, MI, USA
Posts: 1,202
Default

ok at ................ Intake............................. EX
.200 lift the TW:125 AFR:123 .......... TW:104 AFR:118
.300 lift the TW:187 AFR:186 .......... TW:139 AFR:153
.400 lift the TW:226 AFR:225 .......... TW:166 AFR:178
.500 lift the TW:241 AFR:250 .......... TW:187 AFR:185
.600 lift the TW:242 AFR:250 .......... TW:193 AFR:191


Ok All that said
................ Intake..................... EX
.200.... TW by 2cfm........ AFR by 14cfm
.300.... TW by 1cfm........ AFR by 14cfm
.400.... TW by 1cfm........ AFR by 12cfm
.500.... AFR by 9cfm........ TW by 2cfm
.600.... AFR by 8cfm........ TW by 2cfm
OK the Heads are very Close with the AFR beating the TW By a BIT ...... need to rember that the AFR are 1.90 valves 165CC runners and the TW are 2.02 valves 170CC runners so that being said the AFR have a bit better Velocity but very cloes with only 5CC diff in the Runners next the TW are 61cc Cambers and the AFR are 58cc one you can get they have a 62cc I want to say not 100% sure. But any how the 61cc to 58cc, the 58 cc heads will make a bit more Compression and help make more power.
SO the AFR are Better out of the box in air Flow wise I THINK might be depatable Flow ## can vary on both heads.... BUT the Added Compression on the AFR with Make More Power Hands down!!!
So It Looks EZ the AFR heads are Better out of the box right!!!BUT!!!!!! BUT!!!!!! the AFR heads are about $300 more If you want could get the TW and do $300 in work to it and Yes I would be better than the AFR's are...... The TW ARE a VERY good head!!! And for a $1,000 it is the best head out there!!!!!
Out of the BOX the AFR are the best.... It is Up to you.....
__________________
Engine: steel mounts, Under drive pulleys, K&N, GT-40 Intake ported Lower, No power steering, No A/C, Mac cold intake, 65MM TB, 255 Fuel pump, 24's, AFR 165 58cc, Rocker Arms 1.7with the stock Cam, 1 5/8 short headers, offRoad X-pipe
Drive Train: 3.55, T-5 with a Pro 5.0 shifter
12.656@107.71MPH See It at www.T-racing.com/mustang.htm
Stang Runner is offline   Reply With Quote
Old 12-27-2001, 03:16 AM   #22
mustangbob19
Registered Member
 
Join Date: Sep 2000
Location: Minnesota
Posts: 125
Default

With all thing considered AFR's for $1250 are the best bet!
__________________
1990 Mustang GT 5.0
1966 Mustang 200 six
2001 Ford F-150 5.4
mustangbob19 is offline   Reply With Quote
Old 12-31-2001, 09:03 AM   #23
MustangDanny
Registered Member
 
MustangDanny's Avatar
 
Join Date: Nov 2001
Location: Dover, DE
Posts: 70
Default

What about the quality issues with the TW heads. Valve guild wear...??
__________________
--
-1991 LX 5.0 Sedan, 5 spd (new 'Z' tranny), 3.73, aluminum DS, Hedman headers, 190 LPH, MAC CAI, Flowmaster catback. (170K miles on motor)
Best ET: 14.434 @ 96.04 MPH - 2.205 60' (Radials)
My Notch
MustangDanny is offline   Reply With Quote
Old 12-31-2001, 09:33 AM   #24
Stang Runner
Registered Member
 
Stang Runner's Avatar
 
Join Date: Jun 1999
Location: Walker, MI, USA
Posts: 1,202
Default

From what I here the new ones have been fixed it was only the frist ones that came out all new ones are fixed now If you get it used Some here Might be able to help you tell them apart.
__________________
Engine: steel mounts, Under drive pulleys, K&N, GT-40 Intake ported Lower, No power steering, No A/C, Mac cold intake, 65MM TB, 255 Fuel pump, 24's, AFR 165 58cc, Rocker Arms 1.7with the stock Cam, 1 5/8 short headers, offRoad X-pipe
Drive Train: 3.55, T-5 with a Pro 5.0 shifter
12.656@107.71MPH See It at www.T-racing.com/mustang.htm
Stang Runner is offline   Reply With Quote
Old 12-31-2001, 12:50 PM   #25
Dark Knight
Registered Member
 
Dark Knight's Avatar
 
Join Date: Oct 1998
Location: Az
Posts: 854
Default

I like my AFR's too... not a problem with them in a year of daily driving..... FWIW... flow numbers at .600-.700 lift are meaningless unless you are running a cam that big.. you have to check piston to valve clearance with either head with a big cam...duration is as much or more of a factor than lift.. better safe than sorry...
__________________
84 convt,roller 302,AFR's, performer
3.55's, underdrives BBK shorties
stock cam, 1.7's
13.58@102.84 and a '68 stang .. project 8 sec street car... 557 big block + N20 :-)
http://members.cox.net/darkknight302/68nwrear.jpg
Dark Knight is offline   Reply With Quote
Old 01-05-2002, 12:57 PM   #26
UNICORN
Registered Member
 
Join Date: Jan 2002
Location: Mesquite
Posts: 12
Default

I like my Dart SR aluminum heads, they flow 295cfm intake, and 195cfm exhaust. Oh yeah i only paid $950 for 'em
UNICORN is offline   Reply With Quote
Old 01-05-2002, 08:20 PM   #27
Dark Knight
Registered Member
 
Dark Knight's Avatar
 
Join Date: Oct 1998
Location: Az
Posts: 854
Cool

are the dart sr's smog legal? kinda big for a mild street car..
__________________
84 convt,roller 302,AFR's, performer
3.55's, underdrives BBK shorties
stock cam, 1.7's
13.58@102.84 and a '68 stang .. project 8 sec street car... 557 big block + N20 :-)
http://members.cox.net/darkknight302/68nwrear.jpg
Dark Knight is offline   Reply With Quote
Old 01-06-2002, 12:46 AM   #28
UNICORN
Registered Member
 
Join Date: Jan 2002
Location: Mesquite
Posts: 12
Default

yeah they are smog legal, but i've got the smog holes in the back of the heads blocked off anyways, it's not like it would pass a "real" inspection considering it's a carb setup, no smog pump, no cats, etc. As of March this year, all cars in all the major cities down here in Texas will have to be dynoed anyway, inspections are going up in price to around $40.00. Most people don't even know about this unfortunately. I'm going to get my car reinspected the last week of february before the price goes up .
UNICORN is offline   Reply With Quote
Old 01-06-2002, 07:07 AM   #29
Dark Knight
Registered Member
 
Dark Knight's Avatar
 
Join Date: Oct 1998
Location: Az
Posts: 854
Default

we've been doing that test for years... a big PITA, thats why I run all the smog stuff.. to much of a hassle to put it on every couple years.. mines carbed originally, so I dont have to worry about that..most of the places here, the people dont have a clue if it should be carbed or not... they just test it.. heheh
__________________
84 convt,roller 302,AFR's, performer
3.55's, underdrives BBK shorties
stock cam, 1.7's
13.58@102.84 and a '68 stang .. project 8 sec street car... 557 big block + N20 :-)
http://members.cox.net/darkknight302/68nwrear.jpg
Dark Knight is offline   Reply With Quote
Old 09-17-2002, 09:37 PM   #30
Coupe50h
Registered Member
 
Coupe50h's Avatar
 
Join Date: Aug 2002
Location: SanAntonio, Tx
Posts: 957
Default

Yea 4 counties around here will get the emmissions testing around sanantonio, but the newspaper said it wont happen until 2005, i know i wont pass
but back to the heads, my friend got some tfs heads, he said he had to do 300$ worth of work on them, the out of the box guides, springs and keepers are crap, his car does haul some serious arse though.

im going edel or afr for the pedestal mount rockers so i dont have to buy new ones, screw the flow #'s, anything beats e7's
__________________
X-Texas highway patrol ssp 1990 coupe - exploder Gt-40 iron heads, Explorer intake, 19 lber's. E-cam. crane 1.7 rollers. 190fp. 75mm maf. 65mm tb, tubular subframe connectors, mac cai, Asp crank pulley, T-5, king cobra clutch, flowtech 1-5/8 unequals, mac X-pipe Frpp driveshaft, lakewood Lca's.
race weight 3,160

12.69 @ 107.35, 1.71 60' 26x8.5 drag's 3.90 gear

13.20 @ 106.91 - 235/60/15 firestones 2.3 60' 3.27 gear
Coupe50h is offline   Reply With Quote
Old 09-17-2002, 10:08 PM   #31
UNICORN
Registered Member
 
Join Date: Jan 2002
Location: Mesquite
Posts: 12
Default

Quote:
Originally posted by Coupe50h
Yea 4 counties around here will get the emmissions testing around sanantonio, but the newspaper said it wont happen until 2005, i know i wont pass
but back to the heads, my friend got some tfs heads, he said he had to do 300$ worth of work on them, the out of the box guides, springs and keepers are crap, his car does haul some serious arse though.

im going edel or afr for the pedestal mount rockers so i dont have to buy new ones, screw the flow #'s, anything beats e7's
Damn dude,this is an OLD THREAD! LOL.
UNICORN is offline   Reply With Quote
Old 09-30-2002, 01:27 AM   #32
TMASTER
Registered Member
 
TMASTER's Avatar
 
Join Date: Sep 2002
Location: TEXAS
Posts: 161
Talking what heads

Iv'e been looking at heads for a long time, and Id say go with the Trick Flow twisted Wedge there $1000
If money is no object go with the AFR 165 or 185 heads $1300
remember that you have to buy Roller rockers/pushrods/lifters with new heads. The power you get from these is gonna be very close to the same. check out both there web sites and read the specs and flow rates...
TMASTER is offline   Reply With Quote
Old 06-04-2010, 10:17 PM   #33
1965GTO
Registered Member
 
Join Date: Jul 2001
Location: Dupo,ill
Posts: 219
Default Re: Help me Pick What Heads...

It is 2010 now and you can buy a complete 306 from Ford including carb and distributor for $3500!
1965GTO is offline   Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Help I need heads!! SmokinStangGT Windsor Power 18 05-04-2003 10:05 PM
New FRP Heads for 96 - 98 4.6 surfbeast Modular Madness 9 11-21-2002 07:02 PM
will 99-2002 cams out of the pi heads fit in the 96-98 stock heads slow98 Modular Madness 6 10-25-2002 04:28 PM
GT-40 heads 5.0 Pony Windsor Power 1 09-10-2002 10:26 PM
Which heads are beter? patman Classic Mustangs 3 12-02-1999 03:42 AM


All times are GMT -5. The time now is 06:52 PM.


SEARCH