How about GT-40 heads?

SlowStang2 · 07-02-2001, 07:36 PM

I have stock 94 GT heads. I need heads badly and I wanted to know if the GT-40 selection are a good buy and need no other parts for installation. Are these the heads that are on 94 cobras? Are these any good? Anyone with these heads pleased with performance and need not bother with any other brand? Let me know, everyone has helped me tremendously.

------------------
94' Stang GT Convertible Cobra upper&lower, Mac cold air w/K&N, BBK equal length shorties, BBK offroad H-pipe, American Thunder cat-back, BBK T/B 65mm, 24lb injectors, Pro-77mm MAM, pulleys, aluminum driveshaft, 3.55s 14.4@100. (Sad, i know. i have stock heads)

93CobraR · 07-02-2001, 07:41 PM

Look in the sig. I love mine. All you need is new head bolts/and head bushings.

------------------
87 GT, 4 inch cowl hood,17x9 Cobra R's/255/45's,GT-40 heads,Crane 2031, Edelbrock intake, long tubes headers,h-pipe,Flows,BBK cold air, Mass air,70mm MAF, 1.7's, 1" spacer,underdrive pulleys,Pro 5.0, King Cobra, Adj. fuel Reg., Lakewood Lift Bars,50/50's,subframes, 4.10's.
Best time 12.759
Best MPH 106.79
Best 60' 1.695

Visit my site at:
http://www.geocities.com/cobrar93_2000/MyPage.html

MDM · 07-02-2001, 11:20 PM

I am running the GT40 irons on my supercharged 302. The machine shop work has been pretty extensive (porting, polishing, 3 angle, o-rings, cut for loc wire gaskets). The car is making 403 @ the wheels with these heads and many other mods. I am happy with the performance, but would go with aluminums when I do it again. Trick Flow makes a good head at low cost. You may want to check them out. I would definitely go with aluminum.

oneba87lx · 07-03-2001, 02:02 PM

Their not bad heads,I have been pretty happy with mine. Installation was a breeze, all I done was get a set of ARP head bolts.

------------------
87 notch,maf conv, gt-40 int, gt-40 heads, f303, 1.6rr,24lb inj,190lph, 3 chamber flowmasters, mac equal length shorties,3.73's

07-02-2001, 07:36 PM	#1
SlowStang2 Registered Member Join Date: May 2001 Location: Stuart, FL, US Posts: 147	How about GT-40 heads? I have stock 94 GT heads. I need heads badly and I wanted to know if the GT-40 selection are a good buy and need no other parts for installation. Are these the heads that are on 94 cobras? Are these any good? Anyone with these heads pleased with performance and need not bother with any other brand? Let me know, everyone has helped me tremendously. ------------------ 94' Stang GT Convertible Cobra upper&lower, Mac cold air w/K&N, BBK equal length shorties, BBK offroad H-pipe, American Thunder cat-back, BBK T/B 65mm, 24lb injectors, Pro-77mm MAM, pulleys, aluminum driveshaft, 3.55s 14.4@100. (Sad, i know. i have stock heads)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
is there a visual diff. between the stock e7 and gt 40 iron heads	93calcobra	Windsor Power	3	11-05-2002 09:58 AM
will 99-2002 cams out of the pi heads fit in the 96-98 stock heads	slow98	Modular Madness	6	10-25-2002 04:28 PM
351W heads on 289?	66 Racer	Classic Mustangs	4	10-18-2001 03:12 AM
GT and LS-1 get into Tangle. GT WINS!!	Mercury	Stang Stories	8	06-26-2001 12:49 PM
is there any difference between 351C heads and 351M heads	tireburner163	Windsor Power	7	03-09-2001 09:26 PM

07-02-2001, 07:41 PM	#2
93CobraR Registered Member Join Date: Oct 1999 Location: Cincinnati, Ohio Posts: 1,575	Look in the sig. I love mine. All you need is new head bolts/and head bushings. ------------------ 87 GT, 4 inch cowl hood,17x9 Cobra R's/255/45's,GT-40 heads,Crane 2031, Edelbrock intake, long tubes headers,h-pipe,Flows,BBK cold air, Mass air,70mm MAF, 1.7's, 1" spacer,underdrive pulleys,Pro 5.0, King Cobra, Adj. fuel Reg., Lakewood Lift Bars,50/50's,subframes, 4.10's. Best time 12.759 Best MPH 106.79 Best 60' 1.695 Visit my site at: http://www.geocities.com/cobrar93_2000/MyPage.html

07-02-2001, 11:20 PM	#3
MDM Registered Member Join Date: Feb 2000 Location: Flemington, NJ USA Posts: 166	I am running the GT40 irons on my supercharged 302. The machine shop work has been pretty extensive (porting, polishing, 3 angle, o-rings, cut for loc wire gaskets). The car is making 403 @ the wheels with these heads and many other mods. I am happy with the performance, but would go with aluminums when I do it again. Trick Flow makes a good head at low cost. You may want to check them out. I would definitely go with aluminum.

07-03-2001, 02:02 PM	#4
oneba87lx Registered Member Join Date: Jun 2001 Location: lake city, FL Posts: 26	Their not bad heads,I have been pretty happy with mine. Installation was a breeze, all I done was get a set of ARP head bolts. ------------------ 87 notch,maf conv, gt-40 int, gt-40 heads, f303, 1.6rr,24lb inj,190lph, 3 chamber flowmasters, mac equal length shorties,3.73's