How to disconnect the fuel lines?

Deividas93GT · 12-02-2002, 05:35 PM

I will be doing my HCI swap in less that 3 weeks and was wondering what is the easiest and safest ways of disconnecting the fuel lines...thanks in advance

WADS56 · 12-02-2002, 07:14 PM

The best way is to get the special tool. AutoZone loans them or you can buy one. I just cut a thin piece of aluminum and bent it to fit in there to release the spring.

Wade

sn95gt19 · 12-02-2002, 10:12 PM

if your real cheap, or "in case of emergancy" like me. you can use a hose clamp, just push it all the way around the circle spring inside there. and wallaaa, its off! or you could go spend $5.00 and get the fuel/ac line disconnect set from any parts store! good luck

Deividas93GT · 12-03-2002, 09:00 AM

Thanks for the replies. I went to Murrays and got myself the 3/8 and 5/16 fuel line disconnecting things. Hopefully it wont be to hard to get them off.....

12-02-2002, 05:35 PM	#1 (permalink)
Deividas93GT Registered Member Join Date: Nov 2002 Location: Dearborn Hts, MI Posts: 13	How to disconnect the fuel lines? I will be doing my HCI swap in less that 3 weeks and was wondering what is the easiest and safest ways of disconnecting the fuel lines...thanks in advance __________________ 93 GT, 5 speed....Full Exhaust, 373's, Nitto DR's....1.92/13.90/97(26x10.5 ET Streets)

12-02-2002, 10:12 PM	#3 (permalink)
sn95gt19 motors done......woohooo Join Date: Mar 2002 Posts: 799	if your real cheap, or "in case of emergancy" like me. you can use a hose clamp, just push it all the way around the circle spring inside there. and wallaaa, its off! or you could go spend $5.00 and get the fuel/ac line disconnect set from any parts store! good luck __________________ 95gt lazer red (98 cobra clone) Rice Haters Club Member #116

12-03-2002, 09:00 AM	#4 (permalink)
Deividas93GT Registered Member Join Date: Nov 2002 Location: Dearborn Hts, MI Posts: 13	Thanks for the replies. I went to Murrays and got myself the 3/8 and 5/16 fuel line disconnecting things. Hopefully it wont be to hard to get them off..... __________________ 93 GT, 5 speed....Full Exhaust, 373's, Nitto DR's....1.92/13.90/97(26x10.5 ET Streets)

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
depressurize fuel lines '00 F-150??	Simi Stang	Built Ford Tough	4	07-10-2004 02:52 AM
Will fuel boil if lines are too close to headers?	Stang_ROTY	Windsor Power	16	07-12-2003 12:12 PM
Fuel lines	WhiteLX	Windsor Power	8	08-17-2002 08:32 AM
Fuel Lines...EMERGENCY HELP!!	quick89gt	Windsor Power	1	03-20-2001 06:08 PM
EFI fuel lines and spark plugs	vangogh	Windsor Power	0	02-20-2001 02:40 PM

12-02-2002, 07:14 PM	#2 (permalink)
WADS56 gear banger Join Date: Aug 2000 Location: CHICAGO Posts: 1,144	The best way is to get the special tool. AutoZone loans them or you can buy one. I just cut a thin piece of aluminum and bent it to fit in there to release the spring. Wade

Sponsored Links