MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Windsor Power (http://forums.mustangworks.com/forumdisplay.php?f=8)
-   -   How the he11 do i get this wheel off!? (http://forums.mustangworks.com/showthread.php?t=3241)

NoSlow5.0 05-22-2001 07:14 PM

How the he11 do i get this wheel off!?
 
I am trying to swap steering wheels on my 87 GT(no air bag, with cruise control). I can't figure out how to get the wheel off and my stupid a$$ Hanes manual is a piece of **** that doesn't help at all! Someone please help Thanks Jonathan

Stang_ROTY 05-22-2001 08:44 PM

I had an 87GT and all I had to do was remove the center bolt and borrow a steering wheel puller from a friend. If you can't borrow one rent it from Advance Auto.

Good luck

------------------
Almost done

93 GT, Dynamic C4, 8 pt cage, chute,
Sothside Machine bars & Sub-frames, 3.73's
'69 393 stroker w/SRP pistons, Edlebrock Performer heads, Performer RPM Upper & Lower Manifold..Crane Gold 1.6 Rollers..BBK 70MM TB & cats..30lb Injectors..Cartech Fuel System..

Stang_ROTY 05-22-2001 08:45 PM

I had an 87GT and all I had to do was remove the center bolt and borrow a steering wheel puller from a friend. If you can't borrow one rent it from Advance Auto.

Good luck

------------------
Almost done

93 GT, Dynamic C4, 8 pt cage, chute,
Sothside Machine bars & Sub-frames, 3.73's
'69 393 stroker w/SRP pistons, Edlebrock Performer heads, Performer RPM Upper & Lower Manifold..Crane Gold 1.6 Rollers..BBK 70MM TB & cats..30lb Injectors..Cartech Fuel System..

NoSlow5.0 05-22-2001 09:31 PM

Thanks Stang Roty. I got it off. I just had to relax for a second, then i went out and figured it out real quick. New wheel looks great. Light Em Up!! http://www.mustangworks.com/msgboard/smile.gif

Stang_ROTY 05-23-2001 08:05 PM

No prob! That's what we are here for. I wish I could do it to mine but I think I'll keep the airbag :-)

------------------
Almost done

93 GT, Dynamic C4, 8 pt cage, chute,
Sothside Machine bars & Sub-frames, 3.73's
'69 393 stroker w/SRP pistons, Edlebrock Performer heads, Performer RPM Upper & Lower Manifold..Crane Gold 1.6 Rollers..BBK 70MM TB & cats..30lb Injectors..Cartech Fuel System..

dinomite 05-23-2001 08:55 PM

CALM DOWN!?!? STEERING WHEEL PULLER!?!?

If I were doing it, i would have taken out that bolt, gotten good and angry, sat in the seat and pulled till it came off and subsequently hit me in the face. Then i would probably destroy the wheel. http://www.mustangworks.com/msgboard/smile.gif


All times are GMT -5. The time now is 03:17 PM.