MustangWorks.com : Ford Forums - View Single Post

Hozer 88GTConv · 06-05-2003, 07:23 PM

Leaks tend to occur on the seals on the cylinders themselves.

Typically, when doing a brake job, you replace the cylinder seals because even if they are not leaking at present, after a flush and bleed, it would really suck to get a leak and ruin a set of shoes.

They are cheap to replace...

Good Luck...

06-05-2003, 07:23 PM	#2
Hozer 88GTConv Registered Member Join Date: Feb 2002 Location: Jacksonville, FL Posts: 706	seals... Leaks tend to occur on the seals on the cylinders themselves. Typically, when doing a brake job, you replace the cylinder seals because even if they are not leaking at present, after a flush and bleed, it would really suck to get a leak and ruin a set of shoes. They are cheap to replace... Good Luck... __________________ 1988 GT Convertible 331 10:1 TW heads, GT-40 intake, MSD, TRW flattops, B Cam w/ 1.7's, MAC exhaust, 24's, 70 TB, 76 MAF, 3.73's, Pro 5.0, Koni's, Anderson PMS, Wideband 02, yatta, yatta... One week with new motor, two speeding tickets...joy