Exactly whats needed for install of o/r??

Stang39r · 04-30-2002, 04:15 PM

alright...im getting an o/r h-pipe. i need to know exactly whats needed. i have a 95 gt. everything is stock. i dont really need to know how to do it but rather what is needed. brackets?? if so, what kind and where is a good place to buy them? thanx a ton.....i just dont want to be unprepared when i get them installed. thanx a ton

Casper5.0 · 04-30-2002, 07:16 PM

Should be all inclusive. I've never had to buy anything, just bolts right up using the factory stuff.

RYAN

93SVTstang · 04-30-2002, 08:00 PM

You won't need any brackets, but you may need a jack-I needed one for mine to lift the H-pipe up even with the cat-back after I got it into the hangars. Good luck

Bad89stang · 05-01-2002, 02:19 AM

Get the O/R pipe into the hangers and EGR tube first then support the back of the pipe with a spare jack(hopefully you aren't using your jack while doing this install!) Place the jack under the crossover pipe. Jack it up level with the flow tubes going to the mufflers. Bolt up the pipe to the headers and then to the flowtubes. You can install the O2 sensors after you are finished if you don't want to risk breaking them. It is pretty easy, but it takes some patience if you are doing it by yourself.

04-30-2002, 04:15 PM	#1
Stang39r Registered Member Join Date: Feb 2002 Location: Chicago Posts: 53	Exactly whats needed for install of o/r?? alright...im getting an o/r h-pipe. i need to know exactly whats needed. i have a 95 gt. everything is stock. i dont really need to know how to do it but rather what is needed. brackets?? if so, what kind and where is a good place to buy them? thanx a ton.....i just dont want to be unprepared when i get them installed. thanx a ton

04-30-2002, 07:16 PM	#2
Casper5.0 Registered Member Join Date: Jun 2000 Location: Stillwater, OK Posts: 107	Should be all inclusive. I've never had to buy anything, just bolts right up using the factory stuff. RYAN __________________ 94 cobra, steeda tri-ax, bbk longtubes, dr. gas x pipe, eec tuner, ultra flo's, 65 mm tb, underdrives, 75 mm MAF, homemade CAI, steeda #19 cam, Steeda LCA's, 3.73's, subframes 13.7 @ 103.03 before cam and gears

04-30-2002, 08:00 PM	#3
93SVTstang Registered Member Join Date: Dec 2000 Location: Metairie, LA, United States Posts: 80	You won't need any brackets, but you may need a jack-I needed one for mine to lift the H-pipe up even with the cat-back after I got it into the hangars. Good luck __________________ Black Metallic '93 Cobra-#4213

05-01-2002, 02:19 AM	#4
Bad89stang Registered Member Join Date: Aug 2001 Location: Ft. Worth, TX Posts: 456	Get the O/R pipe into the hangers and EGR tube first then support the back of the pipe with a spare jack(hopefully you aren't using your jack while doing this install!) Place the jack under the crossover pipe. Jack it up level with the flow tubes going to the mufflers. Bolt up the pipe to the headers and then to the flowtubes. You can install the O2 sensors after you are finished if you don't want to risk breaking them. It is pretty easy, but it takes some patience if you are doing it by yourself. __________________ You're gonna need your seatbelt

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
eibach advice needed	mustardjohn	Small Ponies	6	08-19-2012 08:12 PM
HP guestimates needed for my new ride	Tod	Blue Oval Lounge	6	10-15-2002 06:49 PM
Is chip needed when changing to 3.73's?	bark3rd	Modular Madness	11	04-05-2001 11:21 AM