how much nitrous is to much???

goodyear1984 · 03-06-2007, 03:33 AM

hey guys i have a 92 5.0 and just bought a nitrous works 70mm plate kit adj up to 175hp wet...just want to know what hp jet u guys have run in ur stangs safely....i had the zex125 dry kit but i didnt like it....the bottom end is stock and the top is ported e7 w/springs b303 w/1.7 rollers edelbrock profromer intake 70mm t-body 73c&l maf stock 19lbs inj

1987StangL268X · 03-07-2007, 02:45 PM

i know i guy that has a BONE stock 89 5.0 coupe that ran a 125 shot on his car for a while straight. If it was me i wouldnt run more than 100 if your going to do it all the time. Your car may not have forged pistons with it being a 92. Im pretty sure they went hyperutectic after 89. If you have forged it should be ok if you have hypers.....good luck! Nitrous=death to motors! lol

USMC302 · 03-07-2007, 06:15 PM

the 92 has the forged, they went hyper in 93. I've sprayed a 150 dry kit on forged pistons no problem. That wasn't on stock head gaskets either though....just a thought.

goodyear1984 · 03-08-2007, 12:43 AM

yea it has forged pistons....yup the change was in 93......me and a few friends have been running 125 dry zex kits with no problems...i just got the 175 wet kit and i think ill use a 100 jet on the street and a 150 at the track that shoud prolly be ok for a while

goodyear1984 · 03-08-2007, 12:44 AM

hey usmc302 what head gaskets did you use?

USMC302 · 03-08-2007, 10:30 AM

I used Corteco, but the guys from Outlaw Performance swear by Cometics and they have all run in the 9's with some type of power adder, some times more than one. Both are great.

~The Jester~ · 03-08-2007, 08:15 PM

Quote:

Originally Posted by USMC302

I used Corteco, but the guys from Outlaw Performance swear by Cometics and they have all run in the 9's with some type of power adder, some times more than one. Both are great.

Mr. Gasket's steel head gaskets are made by Cometic, or vice versa. Mr. Gasket is WAY cheaper.

How much nitrous? ---->| |<---- THIS much before it goes "BANG" is just about right. LOL

goodyear1984 · 03-11-2007, 02:37 PM

lol yea i was figuring just goin with the 150...if she starts knocking il pull out the jets and run it w/o jets...it will be one hell of a ride for like 1 and a half seconds..lol..lol..then its time to start to bulid the 1973 351 windsor block i have staring at me in the garage..lol....did u guys read what that kid was asking hes got the 98 cobra he wants 700 hp cheap wtf? lol

bmxmon · 03-21-2007, 01:05 AM

Quote:

Originally Posted by goodyear1984

....did u guys read what that kid was asking hes got the 98 cobra he wants 700 hp cheap wtf? lol

Who doesnt!!!

03-06-2007, 03:33 AM	#1
goodyear1984 Registered Member Join Date: Dec 2006 Location: new york Posts: 482	how much nitrous is to much??? hey guys i have a 92 5.0 and just bought a nitrous works 70mm plate kit adj up to 175hp wet...just want to know what hp jet u guys have run in ur stangs safely....i had the zex125 dry kit but i didnt like it....the bottom end is stock and the top is ported e7 w/springs b303 w/1.7 rollers edelbrock profromer intake 70mm t-body 73c&l maf stock 19lbs inj

03-07-2007, 02:45 PM	#2
1987StangL268X Registered Member Join Date: Feb 2007 Location: Tennessee Posts: 38	Re: how much nitrous is to much??? i know i guy that has a BONE stock 89 5.0 coupe that ran a 125 shot on his car for a while straight. If it was me i wouldnt run more than 100 if your going to do it all the time. Your car may not have forged pistons with it being a 92. Im pretty sure they went hyperutectic after 89. If you have forged it should be ok if you have hypers.....good luck! Nitrous=death to motors! lol __________________ 1987 mustang hatchback. weld wheels, driveshaft loop, subframe connectors,308 w/ 520 lift cam, edelbrock perf rpm alum heads 2.02 1.60 valves, 1.6 roller rockers, edelbrock air gap performer intake, roller lifters, 625 vac secondary demon, c-4 trans w 3,000 stall, 3.73 gears

03-07-2007, 06:15 PM	#3
USMC302 Registered Member Join Date: Apr 2001 Location: Gallatin, Tn Posts: 1,326	Re: how much nitrous is to much??? the 92 has the forged, they went hyper in 93. I've sprayed a 150 dry kit on forged pistons no problem. That wasn't on stock head gaskets either though....just a thought. __________________

03-08-2007, 12:43 AM	#4
goodyear1984 Registered Member Join Date: Dec 2006 Location: new york Posts: 482	Re: how much nitrous is to much??? yea it has forged pistons....yup the change was in 93......me and a few friends have been running 125 dry zex kits with no problems...i just got the 175 wet kit and i think ill use a 100 jet on the street and a 150 at the track that shoud prolly be ok for a while __________________ 347 stroker all forged,arp everything,stud mains w/girdle,7qt pan,full roller, custom cam, aluminum heads swirl valves 5 angle valve job.quick fuel 750,areomotive pump,cobras w/nitto drags,and m/t et drags for the track, ford racing 373 gears,centerforce clutch,tko500,underdrive pulleys,bassani x-pipe,flowmasters ^best et so far 11.6 1.61 60ft coming soon 9sec et's 1992 mustang gt 2001 gmc 1500 4x4 78 century boat 92 skidoo

03-08-2007, 12:44 AM	#5
goodyear1984 Registered Member Join Date: Dec 2006 Location: new york Posts: 482	Re: how much nitrous is to much??? hey usmc302 what head gaskets did you use? __________________ 347 stroker all forged,arp everything,stud mains w/girdle,7qt pan,full roller, custom cam, aluminum heads swirl valves 5 angle valve job.quick fuel 750,areomotive pump,cobras w/nitto drags,and m/t et drags for the track, ford racing 373 gears,centerforce clutch,tko500,underdrive pulleys,bassani x-pipe,flowmasters ^best et so far 11.6 1.61 60ft coming soon 9sec et's 1992 mustang gt 2001 gmc 1500 4x4 78 century boat 92 skidoo

03-08-2007, 10:30 AM	#6
USMC302 Registered Member Join Date: Apr 2001 Location: Gallatin, Tn Posts: 1,326	Re: how much nitrous is to much??? I used Corteco, but the guys from Outlaw Performance swear by Cometics and they have all run in the 9's with some type of power adder, some times more than one. Both are great. __________________

03-11-2007, 02:37 PM	#8
goodyear1984 Registered Member Join Date: Dec 2006 Location: new york Posts: 482	Re: how much nitrous is to much??? lol yea i was figuring just goin with the 150...if she starts knocking il pull out the jets and run it w/o jets...it will be one hell of a ride for like 1 and a half seconds..lol..lol..then its time to start to bulid the 1973 351 windsor block i have staring at me in the garage..lol....did u guys read what that kid was asking hes got the 98 cobra he wants 700 hp cheap wtf? lol __________________ 347 stroker all forged,arp everything,stud mains w/girdle,7qt pan,full roller, custom cam, aluminum heads swirl valves 5 angle valve job.quick fuel 750,areomotive pump,cobras w/nitto drags,and m/t et drags for the track, ford racing 373 gears,centerforce clutch,tko500,underdrive pulleys,bassani x-pipe,flowmasters ^best et so far 11.6 1.61 60ft coming soon 9sec et's 1992 mustang gt 2001 gmc 1500 4x4 78 century boat 92 skidoo

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Dry vs wet nitrous	289	Power Adders	3	11-05-2003 03:20 AM
Nitrous AOD how to......	gtsr515	Windsor Power	2	05-01-2002 11:37 PM
Nitrous wet kit in a 4.6	joegodfrey	Modular Madness	7	01-02-2002 10:20 PM
Nitrous-In-A-Bag???	BowTie Eater 5 Liter	Windsor Power	2	09-30-2001 09:12 PM
Zex Nitrous	Cobra98conv	Modular Madness	7	06-16-2000 05:09 PM