Quote:
Originally posted by Blaster
I have edelbrock 6037 performer heads, Typhoon (Edelbrock RPM intake), E-cam, 1 5/8 shorties, 70mm t-body, stock mass air is ported out, stock injectors and fuel pump, 3.55 gears, stock suspension, 26" ET Drags for the track (1.9 60ft's) and a best of 13.5 at 101mph (2300ft at Medicine Hat Canada). I've only ran 3-passes down the strip but there was a stockish LS-1 car running lower 14's w/o slicks.
|
You should ditch the stock/ported mass-air meter for a good aftermarket brand. Get a 73-80mm MAM. You're choking your incoming air...considering the mods done to your motor. With ET Drags you should be getting 1.6 or 1.7 60ft. times. You need to do a good burn out and heat those things up. And launch at somewhere around 5,000-6,000rpms. Oh wait...is this a stick, or an auto? If it's an auto...than that is why you are not yet in the 12s.