How much for a T5 rebuild?

302 LX Eric · 07-16-2001, 08:48 AM

I will be dropping the T5 in the next day or so to install a new aluminum flywheel and King Cobra clutch. While I have the T5 out, I'm thinking about having it rebuilt with T5Z specs. How much is the rebuild kit, and any idea on how much a tranny shop would charge to do it?

Thanks in advance for the replies!

E

------------------
1991 5.0 LX Coupe - 38,000 miles

13.17 @ 106.14 mph w/ 2.138 60'

Coupe Devil · 07-16-2001, 10:16 AM

I rebuilt mine for 250 bucks, parts only. I ordered a Master rebuild kit from Hanlon Motorsports. It came with all the bearings, races, seals, synchro's, plastric finger pads, o-rings, everything. I have a buddy that rebuilt for me so I didn't have any labor charges, but with the time we spent on it I would guess about $300 just labor. If you can do it yourself I highly recommend it. I learned alot by watchin him and I could probably do it myself now.

------------------
'93 lx 4 banger, wrecked '90 lx 5.0, w/ t-5. .030 over fully ported and polihed (did that just to see if I could-first attempt at it). Motor and tranny in use for Ranger project.

Cocked, locked and ready to rock

Pony Power Forever

07-16-2001, 08:48 AM	#1
302 LX Eric or '331 LX Eric' Join Date: Jan 1999 Location: Columbus, Ohio Posts: 2,142	How much for a T5 rebuild? I will be dropping the T5 in the next day or so to install a new aluminum flywheel and King Cobra clutch. While I have the T5 out, I'm thinking about having it rebuilt with T5Z specs. How much is the rebuild kit, and any idea on how much a tranny shop would charge to do it? Thanks in advance for the replies! E ------------------ 1991 5.0 LX Coupe - 38,000 miles 13.17 @ 106.14 mph w/ 2.138 60'

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
rebuild or not to rebuild???	NotchStang59311	Windsor Power	9	04-14-2004 05:28 PM
T-5 Rebuild	95/GT/5.0	Windsor Power	9	12-26-2002 10:23 PM
TRANS rebuild kits for 5spd	drtbiker	Windsor Power	3	08-18-2002 04:25 PM
Low cost rebuild.	salcmc	Classic Mustangs	3	09-11-2001 09:16 PM
advise on T-5 rebuild	429mustang	Blue Oval Lounge	0	07-23-2001 01:51 PM

07-16-2001, 10:16 AM	#2
Coupe Devil Moderator Join Date: Mar 2001 Location: Myrtle Beach SC Posts: 1,643	I rebuilt mine for 250 bucks, parts only. I ordered a Master rebuild kit from Hanlon Motorsports. It came with all the bearings, races, seals, synchro's, plastric finger pads, o-rings, everything. I have a buddy that rebuilt for me so I didn't have any labor charges, but with the time we spent on it I would guess about $300 just labor. If you can do it yourself I highly recommend it. I learned alot by watchin him and I could probably do it myself now. ------------------ '93 lx 4 banger, wrecked '90 lx 5.0, w/ t-5. .030 over fully ported and polihed (did that just to see if I could-first attempt at it). Motor and tranny in use for Ranger project. Cocked, locked and ready to rock Pony Power Forever