MustangWorks.com : Ford Forums - View Single Post

procharge94 · 11-07-2004, 06:40 PM

The sending units for the stock gauges are ok. As for the pressure in the cooling system, how much extra pressure? The cooling system doesn't seem to have any venting issues and its not exploding out of the radiator when i remove the cap either. The oil in the pan is fine, but there was a milky goo all over the pcv valve when I removed it to make sure the valve was still functional. Am I correct in thinking that somewhere in my lifter valley coolant and oil is mixing?

I'm not sure how to gauge the performance of the car. These problems arrose immedidately after installing all the motor mods(heads, cam, intake, tb, exhaust, etc).

11-07-2004, 06:40 PM	#4
procharge94 Registered Member Join Date: Oct 2004 Location: Gainesville, FL Posts: 103	Re: I checked my radiator temps The sending units for the stock gauges are ok. As for the pressure in the cooling system, how much extra pressure? The cooling system doesn't seem to have any venting issues and its not exploding out of the radiator when i remove the cap either. The oil in the pan is fine, but there was a milky goo all over the pcv valve when I removed it to make sure the valve was still functional. Am I correct in thinking that somewhere in my lifter valley coolant and oil is mixing? I'm not sure how to gauge the performance of the car. These problems arrose immedidately after installing all the motor mods(heads, cam, intake, tb, exhaust, etc).