I found the gas leak part 2
 

After looking a little more closely, it seems the leak is at the top of the injector. I could see gas bubbling on the brass(?) protion of the fuel injector. Is this a bad O ring? If it is does that mean a whole new injector. And one more question, since I have never done anything with fuel injectors are they difficult to remove? I hope this clears some things up. Thanks for the help.
KG88GT

Yes, that means it's a bad O-ring. You can pick up a new set at the local autoparts store. Depending on which side it is, you might have to unbolt the upper manifold (if it's on the driver side). It's pretty easy to take them off, just pull :p :D
When you put the new O-rings on, oil them down with a little bit of 3-in-1 oil or light weight motor oil. This will help seal it better and let the injector slide into the fuel rail easier. I've done this to both set of injectos I've replaced and haven't had a problem (I went from 19lb-->24lb-->30lb :D).