i really need your help, fast....!

avbcon12 · 01-29-2002, 05:40 PM

i have just got some ford fuel injectors, they are blue, what size are they?
i think i recall they are 24#. is that right?

please let me know.
adam

LX XLR8R · 01-29-2002, 05:53 PM

yes you are correct..

joe4speed · 01-29-2002, 05:53 PM

Grey 16 lb/hr Stock for non H.O. 5.0's

Orange 19 lb/hr Stock for most 5.0's

Light Blue 24 lb/hr Stock for all Cobras

Red 30 lb/hr

Dark Blue 36 lb/hr

got this off of the internet

avbcon12 · 01-29-2002, 06:00 PM

hahaha, thanks guys. i appreciate it.

now i just have to figure out if i have 24# or 36# haha
on one side they have markings: E7TE-B1B
on the other they have (on top): 751
(on bottom): 0280150728

can anyone tell which ones i have by that????

thanks,
adam

Jeb_Bush_2000 · 01-29-2002, 06:23 PM

Quote:

Light Blue 24 lb/hr Stock for all Cobras

Not the '95s. I know that for sure. My father's has 19lb ones.

joe4speed · 01-29-2002, 06:37 PM

I would imagine if you have a relatively stock engine that they're probably 24# injectors!

avbcon12 · 01-29-2002, 06:43 PM

well the thing is they didnt come off my engine, i just got them new. actually i got 100 of them NEW IN BOX. ok,i just found out for sure that they are 24# injectors

oh yea, if anyone needs some let me know....make a reasonable offer. (i paid a lot for 100 of them)

abeer1220@hotmail.com

thanks again,
adam

DRASTiK · 01-30-2002, 07:09 PM

just out of curiosity, how and why did you buy 100 injectors?

avbcon12 · 01-30-2002, 07:16 PM

i bought them from my uncle, he got them from a closeout.
why?: bacause i figure i needed some and then i can sell the rest.
oh yea, i got 100 because thats what the bosch box holds.
adam

LX XLR8R · 01-31-2002, 07:28 PM

you have 100 24#er's....thats funny as $hit..sounds like one of the scams i pull

avbcon12 · 01-31-2002, 08:29 PM

this isnt any scam man!

thats the amount that came in the package....
heres a picture

i got them from my uncle who got them a while ago from a closeout.
i just need to get rid of them because i deffinatly dont need them.

adam

DRASTiK · 01-31-2002, 11:43 PM

man, that's a lot of injectors!! (I'm just pissed because I just bought some used ones and probably paid more for them than I could've got some from you for)

avbcon12 · 02-01-2002, 08:04 AM

yea, i know how you feel. thats what ive been going through the whole time i've been building cars and now i finally cought a break....

sorry i couldnt help you,
adam

gtsr515 · 02-01-2002, 08:00 PM

I am pretty sure that 24's have 4 holes at the pintle and the 36's have 1 hole at the pintle.

01-29-2002, 05:40 PM	#1
avbcon12 Registered Member Join Date: Jul 2001 Location: West Bloomfield, MI Posts: 391	i really need your help, fast....! i have just got some ford fuel injectors, they are blue, what size are they? i think i recall they are 24#. is that right? please let me know. adam __________________ 90 GT black/ grey leather ported GT-40 heads w/ 1.7RR, Cobra intake w/ ported lower, 24# injectors, 190LPH pump, 75mm Pro-M MAF, 65mm TB, K&N panel, BBK long tubes, Off road H-pipe, 2 ch. Flowmaster, Black magic fan, Kirban FPR, 180 deg. T-stat, 3.73's, Steeda Tri-Ax, 130 amp alt. Accell 8.8 race wires/cap/rotor, motorcraft plugs, Factory Five suspension, etc etc etc.... http://avbcon12.stangnet.com

01-29-2002, 05:53 PM	#2
LX XLR8R Dirk Diggler Join Date: Feb 1999 Location: SLOATSBURG, NY Posts: 1,931	yes you are correct.. __________________ 95 undecided cubes, AFR 185s,undecided cam, undecided intake, and a 150 hit 89 "turbonotch" 2.3T You might want to hold on..i saw this on a cartoon once

01-29-2002, 05:53 PM	#3
joe4speed He said Member...heh, heh Join Date: Sep 1999 Location: Jupiter, Florida U.S.A. Posts: 3,718	Grey 16 lb/hr Stock for non H.O. 5.0's Orange 19 lb/hr Stock for most 5.0's Light Blue 24 lb/hr Stock for all Cobras Red 30 lb/hr Dark Blue 36 lb/hr got this off of the internet __________________ *Joe!* 1988 GT, 13.58@101mph Check out my listing! Click here! Or my website:www.joe4speed.com

01-29-2002, 06:00 PM	#4
avbcon12 Registered Member Join Date: Jul 2001 Location: West Bloomfield, MI Posts: 391	hahaha, thanks guys. i appreciate it. now i just have to figure out if i have 24# or 36# haha on one side they have markings: E7TE-B1B on the other they have (on top): 751 (on bottom): 0280150728 can anyone tell which ones i have by that???? thanks, adam __________________ 90 GT black/ grey leather ported GT-40 heads w/ 1.7RR, Cobra intake w/ ported lower, 24# injectors, 190LPH pump, 75mm Pro-M MAF, 65mm TB, K&N panel, BBK long tubes, Off road H-pipe, 2 ch. Flowmaster, Black magic fan, Kirban FPR, 180 deg. T-stat, 3.73's, Steeda Tri-Ax, 130 amp alt. Accell 8.8 race wires/cap/rotor, motorcraft plugs, Factory Five suspension, etc etc etc.... http://avbcon12.stangnet.com

01-29-2002, 06:37 PM	#6
joe4speed He said Member...heh, heh Join Date: Sep 1999 Location: Jupiter, Florida U.S.A. Posts: 3,718	I would imagine if you have a relatively stock engine that they're probably 24# injectors! __________________ *Joe!* 1988 GT, 13.58@101mph Check out my listing! Click here! Or my website:www.joe4speed.com

01-29-2002, 06:43 PM	#7
avbcon12 Registered Member Join Date: Jul 2001 Location: West Bloomfield, MI Posts: 391	well the thing is they didnt come off my engine, i just got them new. actually i got 100 of them NEW IN BOX. ok,i just found out for sure that they are 24# injectors oh yea, if anyone needs some let me know....make a reasonable offer. (i paid a lot for 100 of them) abeer1220@hotmail.com thanks again, adam __________________ 90 GT black/ grey leather ported GT-40 heads w/ 1.7RR, Cobra intake w/ ported lower, 24# injectors, 190LPH pump, 75mm Pro-M MAF, 65mm TB, K&N panel, BBK long tubes, Off road H-pipe, 2 ch. Flowmaster, Black magic fan, Kirban FPR, 180 deg. T-stat, 3.73's, Steeda Tri-Ax, 130 amp alt. Accell 8.8 race wires/cap/rotor, motorcraft plugs, Factory Five suspension, etc etc etc.... http://avbcon12.stangnet.com Last edited by avbcon12; 01-29-2002 at 08:07 PM..

01-30-2002, 07:09 PM	#8
DRASTiK Registered Member Join Date: May 2001 Location: Yuma, AZ Posts: 536	just out of curiosity, how and why did you buy 100 injectors?

01-30-2002, 07:16 PM	#9
avbcon12 Registered Member Join Date: Jul 2001 Location: West Bloomfield, MI Posts: 391	i bought them from my uncle, he got them from a closeout. why?: bacause i figure i needed some and then i can sell the rest. oh yea, i got 100 because thats what the bosch box holds. adam __________________ 90 GT black/ grey leather ported GT-40 heads w/ 1.7RR, Cobra intake w/ ported lower, 24# injectors, 190LPH pump, 75mm Pro-M MAF, 65mm TB, K&N panel, BBK long tubes, Off road H-pipe, 2 ch. Flowmaster, Black magic fan, Kirban FPR, 180 deg. T-stat, 3.73's, Steeda Tri-Ax, 130 amp alt. Accell 8.8 race wires/cap/rotor, motorcraft plugs, Factory Five suspension, etc etc etc.... http://avbcon12.stangnet.com Last edited by avbcon12; 01-30-2002 at 07:23 PM..

01-31-2002, 07:28 PM	#10
LX XLR8R Dirk Diggler Join Date: Feb 1999 Location: SLOATSBURG, NY Posts: 1,931	you have 100 24#er's....thats funny as $hit..sounds like one of the scams i pull __________________ 95 undecided cubes, AFR 185s,undecided cam, undecided intake, and a 150 hit 89 "turbonotch" 2.3T You might want to hold on..i saw this on a cartoon once

01-31-2002, 11:43 PM	#12
DRASTiK Registered Member Join Date: May 2001 Location: Yuma, AZ Posts: 536	man, that's a lot of injectors!! (I'm just pissed because I just bought some used ones and probably paid more for them than I could've got some from you for)

02-01-2002, 08:04 AM	#13
avbcon12 Registered Member Join Date: Jul 2001 Location: West Bloomfield, MI Posts: 391	yea, i know how you feel. thats what ive been going through the whole time i've been building cars and now i finally cought a break.... sorry i couldnt help you, adam __________________ 90 GT black/ grey leather ported GT-40 heads w/ 1.7RR, Cobra intake w/ ported lower, 24# injectors, 190LPH pump, 75mm Pro-M MAF, 65mm TB, K&N panel, BBK long tubes, Off road H-pipe, 2 ch. Flowmaster, Black magic fan, Kirban FPR, 180 deg. T-stat, 3.73's, Steeda Tri-Ax, 130 amp alt. Accell 8.8 race wires/cap/rotor, motorcraft plugs, Factory Five suspension, etc etc etc.... http://avbcon12.stangnet.com

02-01-2002, 08:00 PM	#14
gtsr515 Registered Member Join Date: Nov 2001 Location: Sunny, Hot, Sebring, Florida Posts: 725	I am pretty sure that 24's have 4 holes at the pintle and the 36's have 1 hole at the pintle. __________________ Remember...2nd place is 1st place for losers!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FAST vs. Chip	STEEDAJEFF	Windsor Power	1	09-29-2002 02:16 PM
new to fast mustangs but not fast cars...I've a few ?'s	XGN	Windsor Power	3	07-03-2002 09:40 AM
Are these fast??	Dark_5.0	Stang Stories	13	05-16-2002 01:19 PM
Super cars and Fast and the Furious	#1 Pony	Blue Oval Lounge	9	01-29-2002 12:54 AM
Pesky Supra, actually thought he had a fast car.	Unit 5302	Stang Stories	7	03-20-2001 01:34 PM