Strange or Moser Axels?? Which Differential?

green92gt · 01-28-2001, 02:54 PM

I am planning to buy axels very soon. Here is what I am going to buy-
SVO Stud Kit
Auburn Pro
C-clip Eliminator
3" Wheel Studs
3:73 gears
50/50 lakewood shocks
Bennet Lower control arms
I am looking to go deep into the 12's this year. Eventually I want to get into the 10's but that is a new motor away. Which should I buy, I know both are from quality companies. Strange has Induction made and thru race made. Will Induction hardened work for me? Or should I not even worry about it and just buy the Moser? By the Way I want 31 spline axels. Also any ideas on the best Differential unit I would appreciate it. Thanks guys for the help.

------------------
92 gt, ATI Procharger 9 Psi., P.A. C-4 w 3200 stall, 3:55's, Flowmaster Dumps, Cobra Intake, MSD,Al. Driveshaft, Jeg's Safety Loop, Griffin Al. Radiator, Stock Heads, Cam, Rockers, 12.5 @ 108 on street tires, much more on the way

Mr 5 0 · 01-28-2001, 04:26 PM

I would get the Moser 31-spline 'race' axles.

Plenty strong and durable for a 12-second car and even that (eventual) 10-second machine.

The Auburn diffs seem to generate a mixed bag of opinions; some love 'em, some say they rot. I think you could just as well get the stock (Traction-Lok) differential beefed up and use that successfully for now. Cheaper; and rebuildable.

01-28-2001, 02:54 PM	#1
green92gt Registered Member Join Date: Dec 1998 Location: Lancaster, Ohio Posts: 159	Strange or Moser Axels?? Which Differential? I am planning to buy axels very soon. Here is what I am going to buy- SVO Stud Kit Auburn Pro C-clip Eliminator 3" Wheel Studs 3:73 gears 50/50 lakewood shocks Bennet Lower control arms I am looking to go deep into the 12's this year. Eventually I want to get into the 10's but that is a new motor away. Which should I buy, I know both are from quality companies. Strange has Induction made and thru race made. Will Induction hardened work for me? Or should I not even worry about it and just buy the Moser? By the Way I want 31 spline axels. Also any ideas on the best Differential unit I would appreciate it. Thanks guys for the help. ------------------ 92 gt, ATI Procharger 9 Psi., P.A. C-4 w 3200 stall, 3:55's, Flowmaster Dumps, Cobra Intake, MSD,Al. Driveshaft, Jeg's Safety Loop, Griffin Al. Radiator, Stock Heads, Cam, Rockers, 12.5 @ 108 on street tires, much more on the way

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Strange noises, rearend trouble?	KiltedBanshees93GT	Classic Mustangs	0	08-19-2003 08:53 AM
US Strange gears	daman007	Windsor Power	2	06-25-2003 06:34 PM
rear axels install?	glxstang	Windsor Power	1	03-28-2002 11:42 PM
moser axels in..rearend built..got a question	LX XLR8R	Windsor Power	2	08-17-2001 09:26 AM
Axels? and Rear Ends? Help!	glxstang	Windsor Power	5	07-06-2001 02:01 AM

01-28-2001, 04:26 PM	#2
Mr 5 0 Conservative Individualist Join Date: May 1997 Location: Wherever I need to be Posts: 7,487	I would get the Moser 31-spline 'race' axles. Plenty strong and durable for a 12-second car and even that (eventual) 10-second machine. The Auburn diffs seem to generate a mixed bag of opinions; some love 'em, some say they rot. I think you could just as well get the stock (Traction-Lok) differential beefed up and use that successfully for now. Cheaper; and rebuildable.