MustangWorks.com : Ford Forums - View Single Post

08-26-2002, 02:35 PM

-use the 1.7 roller rockers (best bolt on when I still had stock heads) they are less than 180 dollars new from summit
-get 3.55's, I have seen better 60 ft's over 3.73's
-get anal with weight in car, lose spare tire, passenger seat, etc
-throw your timing to 13-15 advanced with 92 octane
-launch the car a lil higher in rpm and ride the clutch if necessary
-you may not like this but powershift from 2nd to 3rd to 4th..it will help.
-a aftermarket mass air meter will add 10-15 horsepower also depending on what air inlet set up you have.

in my 92 hatch last year...it went 14.6@99mph..with AOD, full length headers, 1.7 roller rockers and 3.55's and that was all it had on the stock motor...and off road pipe off course.

08-26-2002, 02:35 PM	#5
1PinnerLX Guest Posts: n/a	some ideas to get a 14.9 or better!! -use the 1.7 roller rockers (best bolt on when I still had stock heads) they are less than 180 dollars new from summit -get 3.55's, I have seen better 60 ft's over 3.73's -get anal with weight in car, lose spare tire, passenger seat, etc -throw your timing to 13-15 advanced with 92 octane -launch the car a lil higher in rpm and ride the clutch if necessary -you may not like this but powershift from 2nd to 3rd to 4th..it will help. -a aftermarket mass air meter will add 10-15 horsepower also depending on what air inlet set up you have. in my 92 hatch last year...it went 14.6@99mph..with AOD, full length headers, 1.7 roller rockers and 3.55's and that was all it had on the stock motor...and off road pipe off course.