Linear Mode
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
04-27-2002, 03:21 PM
|
#1 |
|
Registered Member
Join Date: Apr 2002
Posts: 18
|
idle high
I have a problem. It idles a about 1400 rpm all the time. I have replaced the tps and egr valve. I have cleand the black and white clips on the back of the intake and nothing has happened. I have cleaned the throttle body out. That made it run smoother, but the idle is still there.
|
|
|
|
04-27-2002, 03:34 PM
|
#2 |
|
Registered Member
Join Date: Apr 2001
Location: Gallatin, Tn
Posts: 1,326
|
Have you tried adjusting the idle down manually?
__________________
|
|
|
|
|
04-27-2002, 05:37 PM
|
#3 |
|
Registered Member
Join Date: Apr 2002
Posts: 18
|
How would i do that?
|
|
|
|
|
04-27-2002, 06:17 PM
|
#4 |
|
Registered Member
Join Date: Apr 2001
Location: Gallatin, Tn
Posts: 1,326
|
follow the idle cable to the throttle body and look where it connects, there is an idler screw that is adjustable where it is attached to the TB. Simply turb ut to the right to increase and in your case turn it counterclockwise to decrease idle. Sorry I don't have a picture for you. If you still can't find it, have some one puch the gas pedal while you are lokking under the hood and you will see where the cable is and where it rests on the screw. Good luck.
__________________
|
|
|
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| High idle | Hethj7 | Windsor Power | 7 | 08-04-2004 05:45 PM |
| Adjusting Length of high idle on Carb 5.0 | twilightcall | Windsor Power | 8 | 08-06-2003 08:31 AM |
| Low, loppy idle then too high, then low again.... | Fox Body | Windsor Power | 6 | 08-05-2003 11:29 PM |
| Idle too high, Popping thru intake still . . . | SheStang87 | Windsor Power | 3 | 06-23-2003 10:32 PM |
| Still Am a high Idle...... | Stang Runner | Windsor Power | 3 | 05-06-2002 04:23 PM |