MustangWorks.com : Ford Forums - View Single Post - If you have a GT-40 intake and need to go with a 1" phenolic spacer READ

Mike Souslin · 07-18-2001, 12:04 AM

I have a 1" spacer on my car also but it was out of necessity for me. With my heads I had to use the spacer for the upper intake to clear the rocker covers! I do have a very small dent in my hood from where the TB is hitting it when the motor torques over!
The cowl hood will solve this problem in the future!

------------------
91 Coupe with fresh rebuild. Running Stage 2 Avenger heads (51cc chambers), Stage 2 cam (.549, .566)1.7 Crane Gold Race rockers, Port matched GT-40 upper & lower, 75mm Bullet MAF, 65mm Accufab TB, MSD 6AL, Long Tubes through off road and Dynomax muffs. Stock T-5 and 3.73 gears. Big Blue Bottle on it's way!!!
Best time so far = 60'=2.021, 1/8=8.366 at 86.37 mph and the 1/4 was 12.926 at 108.94mph.

07-18-2001, 12:04 AM	#5
Mike Souslin Registered Member Join Date: Sep 1999 Location: Grove City Ohio Posts: 226	I have a 1" spacer on my car also but it was out of necessity for me. With my heads I had to use the spacer for the upper intake to clear the rocker covers! I do have a very small dent in my hood from where the TB is hitting it when the motor torques over! The cowl hood will solve this problem in the future! ------------------ 91 Coupe with fresh rebuild. Running Stage 2 Avenger heads (51cc chambers), Stage 2 cam (.549, .566)1.7 Crane Gold Race rockers, Port matched GT-40 upper & lower, 75mm Bullet MAF, 65mm Accufab TB, MSD 6AL, Long Tubes through off road and Dynomax muffs. Stock T-5 and 3.73 gears. Big Blue Bottle on it's way!!! Best time so far = 60'=2.021, 1/8=8.366 at 86.37 mph and the 1/4 was 12.926 at 108.94mph.