MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Windsor Power (http://forums.mustangworks.com/forumdisplay.php?f=8)
-   -   Injector Info (http://forums.mustangworks.com/showthread.php?t=50565)

Shawn88GT 10-12-2008 09:14 PM

Injector Info
 
Need to replace stock injectors. What is the OE lbs./hr and what would be the best upgrade. At work I have replaced dozens of injectors but never had to deal with impedence. What ohms do I replace with in a 88 GT?

goodyear1984 10-12-2008 11:56 PM

Re: Injector Info
 
the stock are 19#.did u convert to mass air if not u will need a chip.if u did u need a maf housing calibrated for thoes injectors.its still a good idea to get it tuned.what are ur mods?y do u want to change injectors?

Shawn88GT 10-13-2008 07:27 PM

Re: Injector Info
 
Have not converted to mass air. The only mods are exhuast. I didn't plan to replace injectors but during the rebuild when I pulled the injector rail out 4 of the injectors broke the hats off the bottom. Aftermarket injectors are $75 each. Online I can get a set of 8 for $210. Don't plan to go blown so stay with 19#? What about ohms?

goodyear1984 10-14-2008 11:02 AM

Re: Injector Info
 
u can buy just the ends of the injectors.dont go bigger stay with 19# if u get new injectors.idk bout the ohms but if u get some just get ford racing 19# they will be what u need


All times are GMT -5. The time now is 12:05 PM.