MustangWorks.com : Ford Forums - View Single Post

RobertD · 08-18-2001, 11:42 PM

Well, my engine is under way! Along the way I found out that 3 of my injectors are cracked. I need replacements. I was looking at 24 lbers, but don't know if they'd be too big for my needs. Here's what I've got...

306 SB, GT-40P heads, 9.5:1 comp, roller rockers, stock cam, off-road exhaust, 190 lph fuel pump, BBK press regulator, C & L mass air meter. I'll be ditching the stock intake for a Cobra as soon as I can find a good deal and would have upped the injectors then anyways. In the meantime I'll be running the stockers.

Suggestions? I can calibrate the meter to run with either, so that isn't a concern. I just don't want to saturate the car w/ fuel. I just want to be able to get the tune-up right.

------------------
Robert
91GT; 88 ASC McLaren #709

08-18-2001, 11:42 PM	#1
RobertD Registered Member Join Date: Jun 1999 Location: El Paso, Texas, USA Posts: 170	Injector recommendations Well, my engine is under way! Along the way I found out that 3 of my injectors are cracked. I need replacements. I was looking at 24 lbers, but don't know if they'd be too big for my needs. Here's what I've got... 306 SB, GT-40P heads, 9.5:1 comp, roller rockers, stock cam, off-road exhaust, 190 lph fuel pump, BBK press regulator, C & L mass air meter. I'll be ditching the stock intake for a Cobra as soon as I can find a good deal and would have upped the injectors then anyways. In the meantime I'll be running the stockers. Suggestions? I can calibrate the meter to run with either, so that isn't a concern. I just don't want to saturate the car w/ fuel. I just want to be able to get the tune-up right. ------------------ Robert 91GT; 88 ASC McLaren #709