ok go back and read the last few lines of what i wrote above.... it states:
so w/ pedestal mount substitute "slowly torque to 20 pounds" everywhere I wrote "tighten them down 3/4 of a turn".
BTW, if it takes more than one full turn to reach 20 pounds after zero lash, you will need to install shims.
__________________
'89 LX 5.0, off-road h pipe, flowmaster muffs, underdrive pulleys, rebuilt WC T-5, King Cobra Clutch, 65mm throttle body, Explorer Upper/GT40 lower, Lakewood Rear Lift Bars. 76mm C&L Mass air w/ inlet pipe, Twisted wedge heads w/ stage 2 port,polish, MAC equal length shorties, Billet AFPR, 255LPH fuel pump, fresh low end w/ 10.5:1 compression.
If anyone ever wants to go to Raceway Park in Englishtown New Jersey, give me a shout.
RICER HATERS CLUB MEMBER 87!
www.ricehatersclub.com
|