MustangWorks.com : Ford Forums - View Single Post

82 GT · 04-12-2006, 07:04 PM

After pulling my tranny down and installing my new Edge converter, I'm having trouble getting the tranny to mount back up to the engine.
I'm doing this project on the ground, which makes it much harder already.
I can get it within an inch of the engine but I just can't seem to snug it up the rest of the way. All the bolt holes seems to be inline so far. I also made sure the converter was seated properly against the pump.
Why won't it go together

04-12-2006, 07:04 PM	#1
82 GT Import Slayer Join Date: May 1999 Posts: 2,241	installing tranny....need help! After pulling my tranny down and installing my new Edge converter, I'm having trouble getting the tranny to mount back up to the engine. I'm doing this project on the ground, which makes it much harder already. I can get it within an inch of the engine but I just can't seem to snug it up the rest of the way. All the bolt holes seems to be inline so far. I also made sure the converter was seated properly against the pump. Why won't it go together __________________ '82 GT 351W (.060)Comp Cams 274* Extreme Energy cam, ported & polished heads w/ 1.94/1.60 valves 10.3:1 flat top pistons,stealth intake, Mallory dizzy,Holley 750dp carb, BBK shorties,Flowmaster exhaust,C-4 with 3700 stall converter, B&M pro shifter,8.8 rear, 4:10's, subframes, electric fan, powermaster alternator, 4 core radiator.