Do you want AFRs and a cam on a stock bottom?

88workcar · 09-19-2002, 09:59 PM

One of my best freinds and I just put a HR266 cam, holly intake, and 165AFRs on his car. Full weight, stock bottom, 4.11s, ponys & raidials, lowering springs in the back, 4cyl s in front, stock TB, stock rockers, 19lb, short belt. The cam, we were worried that the valves would hit. We checked it with play dough. It looked good???. We went for it. He cranked it last night. Tonight we were at the track for BIKE night. He showed up and they let him run. The best pass was a 13.00 at 108.XX 1.99 60 ft. This is not even close to being tuned right, Oh he has my 73mmC&L that I'll never use( I'm SD). So any way if any of you wanted to use AFRs and didn't know what cam to use, the HR266 works well so far.

fiveohpatrol · 09-19-2002, 11:55 PM

Theres a whole bunch of guys on the corral with those heads, and if I had the cash then I'd definately have a set.

One guy just recently over there put ~350hp to the wheels with AFR165's, ed curtis custom cam, performer RPM intake, 75mm TB and misc other stuff. This is all with a 10:1 306. This thing is in perfect tune though. Most other guys with this combo see about 320rwhp or so, which isnt too shabby for a N/A 302/306

Stang Runner · 09-20-2002, 02:49 PM

I like them....

88workcar · 09-20-2002, 09:03 PM

Well AFR and no one else could tell us how much cam we could put. Tonight we welded one of my torque boxes then went to Coreys and put the 4cly rear springs in. Any body want some blue lowering springs?

fiveohpatrol · 09-21-2002, 12:22 PM

I'll take them if they are free + shipping

Conman · 09-21-2002, 09:52 PM

how much you want for the springs and what are they?
how low are they?

88workcar · 09-22-2002, 08:18 AM

they are blue
they are lowering springs
This is all I know, 100.00 and we pay shipping.

Conman · 09-22-2002, 03:49 PM

not knowing anything about them makes me a little weary

one more question, why did you take them off your car or where did you get them?

Conman · 09-22-2002, 03:50 PM

oops I lied, I have one more question

Would you pay shipping to Canada as well?

JaxTheDJ · 09-22-2002, 05:56 PM

Just sharing my experience with the BBK Blue lowering springs,They made my 60's worse than the stock ones did,too stiff and wont let the car squat,I ordered the Moroso Drag springs with the staggered spring pressure and dropped my 60's from 1.9's to 1.6's(2.1's with the BBK's). It's your money but this is my experience with the lowering springs,yours may vary.The springs from Moroso were 98.00.

88workcar · 09-22-2002, 07:35 PM

I would guess that they are the BBKs, they are blue. They came on Corys car, not mine. We took them off, because they are LOWERING SPRINGS, not dragg springs. To Canada, give me a zip code to mail them to and I'll check shipping. This was a AFR / cam post

Conman · 09-22-2002, 07:43 PM

back to AFR's and cams.

I'm glad everything worked out with the install considering no one else knew if it would work

(check your PM workcar)

Green9550 · 09-22-2002, 11:46 PM

I love my AFR 165's and Ed Curtis cam combo. It seems to make a lot of power for a heavy AODE. I need to work out some tuning issues, but on the whole I think I have an awesome combo.

-Billy

87lx58 · 09-23-2002, 11:58 AM

Stock bottom/stock 302 forged pistons flycut, AFR 185 58cc heads angle milled to 50cc, AFM high rev N-71 cam, Holley intake, 65mm TB, 30lb injectors, long tubes, chip and 4.10 gear. This car is a Factory GT running 26" slicks and shifting at 6500 rpm. Time is 11.72@114 mph

Green9550 · 09-23-2002, 01:07 PM

87lx58,
Sounds almost like a Pure Street combo. Good times. What is your race weight?

-Billy

88workcar · 09-23-2002, 08:15 PM

87 Cory will be floored when I tell him what you run. We are looking for 12.0s at 110+ with his car. You think a 70 mm tb would help you? What MAF do you have? Did you use an Isky valve cutter or was yours done out of the car?

09-19-2002, 09:59 PM	#1
88workcar Registered Member Join Date: Oct 1999 Location: Pierre Part, La. U.S.A. Posts: 1,850	Do you want AFRs and a cam on a stock bottom? One of my best freinds and I just put a HR266 cam, holly intake, and 165AFRs on his car. Full weight, stock bottom, 4.11s, ponys & raidials, lowering springs in the back, 4cyl s in front, stock TB, stock rockers, 19lb, short belt. The cam, we were worried that the valves would hit. We checked it with play dough. It looked good???. We went for it. He cranked it last night. Tonight we were at the track for BIKE night. He showed up and they let him run. The best pass was a 13.00 at 108.XX 1.99 60 ft. This is not even close to being tuned right, Oh he has my 73mmC&L that I'll never use( I'm SD). So any way if any of you wanted to use AFRs and didn't know what cam to use, the HR266 works well so far. __________________ 88workcar 1988 Mustang LX 342. 417rwhp @ 6800. 28 X 10 ET Drag, 4.30s, 10.69 @ 126.43 1.42 60ft. 11.13 @ 127.7 on BFGs 1.72 60ft Rice Hater # 42 To be old and wise, You must first be young and stupid I'm somewhere in tthe middle.

09-19-2002, 11:55 PM	#2
fiveohpatrol I'd rather be basketweaving Join Date: Feb 2000 Location: Indianapolis Posts: 2,551	Theres a whole bunch of guys on the corral with those heads, and if I had the cash then I'd definately have a set. One guy just recently over there put ~350hp to the wheels with AFR165's, ed curtis custom cam, performer RPM intake, 75mm TB and misc other stuff. This is all with a 10:1 306. This thing is in perfect tune though. Most other guys with this combo see about 320rwhp or so, which isnt too shabby for a N/A 302/306 __________________ NMRA O/C 9516 NA pumpgas stickshift 347 10.65@125.6, 6.73@100, 1.41 60ft

09-20-2002, 02:49 PM	#3
Stang Runner Registered Member Join Date: Jun 1999 Location: Walker, MI, USA Posts: 1,202	I like them.... __________________ Engine: steel mounts, Under drive pulleys, K&N, GT-40 Intake ported Lower, No power steering, No A/C, Mac cold intake, 65MM TB, 255 Fuel pump, 24's, AFR 165 58cc, Rocker Arms 1.7with the stock Cam, 1 5/8 short headers, offRoad X-pipe Drive Train: 3.55, T-5 with a Pro 5.0 shifter 12.656@107.71MPH See It at www.T-racing.com/mustang.htm

09-20-2002, 09:03 PM	#4
88workcar Registered Member Join Date: Oct 1999 Location: Pierre Part, La. U.S.A. Posts: 1,850	Well AFR and no one else could tell us how much cam we could put. Tonight we welded one of my torque boxes then went to Coreys and put the 4cly rear springs in. Any body want some blue lowering springs? __________________ 88workcar 1988 Mustang LX 342. 417rwhp @ 6800. 28 X 10 ET Drag, 4.30s, 10.69 @ 126.43 1.42 60ft. 11.13 @ 127.7 on BFGs 1.72 60ft Rice Hater # 42 To be old and wise, You must first be young and stupid I'm somewhere in tthe middle.

09-21-2002, 12:22 PM	#5
fiveohpatrol I'd rather be basketweaving Join Date: Feb 2000 Location: Indianapolis Posts: 2,551	I'll take them if they are free + shipping __________________ NMRA O/C 9516 NA pumpgas stickshift 347 10.65@125.6, 6.73@100, 1.41 60ft

09-21-2002, 09:52 PM	#6
Conman Registered Member Join Date: Apr 2002 Location: Kingston, Ontario Posts: 351	how much you want for the springs and what are they? how low are they? __________________ '88 lx, Black on Black, check it out here Spent all my money on school, what a dumb mistake I'm old enough to know better, but still too young to care.

09-22-2002, 08:18 AM	#7
88workcar Registered Member Join Date: Oct 1999 Location: Pierre Part, La. U.S.A. Posts: 1,850	they are blue they are lowering springs This is all I know, 100.00 and we pay shipping. __________________ 88workcar 1988 Mustang LX 342. 417rwhp @ 6800. 28 X 10 ET Drag, 4.30s, 10.69 @ 126.43 1.42 60ft. 11.13 @ 127.7 on BFGs 1.72 60ft Rice Hater # 42 To be old and wise, You must first be young and stupid I'm somewhere in tthe middle.

09-22-2002, 03:49 PM	#8
Conman Registered Member Join Date: Apr 2002 Location: Kingston, Ontario Posts: 351	not knowing anything about them makes me a little weary one more question, why did you take them off your car or where did you get them? __________________ '88 lx, Black on Black, check it out here Spent all my money on school, what a dumb mistake I'm old enough to know better, but still too young to care.

09-22-2002, 03:50 PM	#9
Conman Registered Member Join Date: Apr 2002 Location: Kingston, Ontario Posts: 351	oops I lied, I have one more question Would you pay shipping to Canada as well? __________________ '88 lx, Black on Black, check it out here Spent all my money on school, what a dumb mistake I'm old enough to know better, but still too young to care.

09-22-2002, 05:56 PM	#10
JaxTheDJ Registered Member Join Date: Aug 2002 Location: Jacksonville,Fla. Posts: 134	Just sharing my experience with the BBK Blue lowering springs,They made my 60's worse than the stock ones did,too stiff and wont let the car squat,I ordered the Moroso Drag springs with the staggered spring pressure and dropped my 60's from 1.9's to 1.6's(2.1's with the BBK's). It's your money but this is my experience with the lowering springs,yours may vary.The springs from Moroso were 98.00. __________________ Jack 1989 Mustang LX: Converted to Carb.650 AED Holley DP,Weiand Stealth Intake,Edelbrock Performer RPM Aluminum Heads,Hooker Super Comps, Ground Pounder Uppers and Lowers,Moroso Drag Springs,NEW COMP Xtreme Energy Cam and 1.6 RR. ,a few other goodies.*** New 1/4 times-12.50 1987 SC GT ( fast as hell) 2001 Powerstroke Tow Vehicle 1989 Coupe. Sometimes when you cry,no one sees your tears.......... Sometimes when you are happy,no one sees your smile......... But,FART just ONE time..........

09-22-2002, 07:35 PM	#11
88workcar Registered Member Join Date: Oct 1999 Location: Pierre Part, La. U.S.A. Posts: 1,850	I would guess that they are the BBKs, they are blue. They came on Corys car, not mine. We took them off, because they are LOWERING SPRINGS, not dragg springs. To Canada, give me a zip code to mail them to and I'll check shipping. This was a AFR / cam post __________________ 88workcar 1988 Mustang LX 342. 417rwhp @ 6800. 28 X 10 ET Drag, 4.30s, 10.69 @ 126.43 1.42 60ft. 11.13 @ 127.7 on BFGs 1.72 60ft Rice Hater # 42 To be old and wise, You must first be young and stupid I'm somewhere in tthe middle.

09-22-2002, 07:43 PM	#12
Conman Registered Member Join Date: Apr 2002 Location: Kingston, Ontario Posts: 351	back to AFR's and cams. I'm glad everything worked out with the install considering no one else knew if it would work (check your PM workcar) __________________ '88 lx, Black on Black, check it out here Spent all my money on school, what a dumb mistake I'm old enough to know better, but still too young to care.

09-22-2002, 11:46 PM	#13
Green9550 Resident Redneck Join Date: Jan 2002 Location: Cecil County, MD Posts: 165	I love my AFR 165's and Ed Curtis cam combo. It seems to make a lot of power for a heavy AODE. I need to work out some tuning issues, but on the whole I think I have an awesome combo. -Billy __________________ 95' GT: 306, XL Ross Pistons, Ultra Lite H-beam Rods, Forged Scat Crank, 28oz Romac, 28oz JW flexplate, FTI ported RPM II intake, FTI ported AFR 165's, FTI custom cam, 75mm BBK Throttle body, 80mm Pro-M, 4800 PI stall, PA Super Comp AODE, Strange 33 spline race axles, Strange ultra lite spool, Motive lite 4.30's, Strange rear race brakes, Mega bite seniors, double adjustable uppers w/spherical bushings, Racecraft anti-roll bar, LPW rear end girdle, Metco d/s loop, A9L conversion, AFM PMS

09-23-2002, 11:58 AM	#14
87lx58 Registered Member Join Date: Sep 2002 Location: pace.fl Posts: 5	AFR's Stock bottom/stock 302 forged pistons flycut, AFR 185 58cc heads angle milled to 50cc, AFM high rev N-71 cam, Holley intake, 65mm TB, 30lb injectors, long tubes, chip and 4.10 gear. This car is a Factory GT running 26" slicks and shifting at 6500 rpm. Time is 11.72@114 mph

09-23-2002, 01:07 PM	#15
Green9550 Resident Redneck Join Date: Jan 2002 Location: Cecil County, MD Posts: 165	87lx58, Sounds almost like a Pure Street combo. Good times. What is your race weight? -Billy __________________ 95' GT: 306, XL Ross Pistons, Ultra Lite H-beam Rods, Forged Scat Crank, 28oz Romac, 28oz JW flexplate, FTI ported RPM II intake, FTI ported AFR 165's, FTI custom cam, 75mm BBK Throttle body, 80mm Pro-M, 4800 PI stall, PA Super Comp AODE, Strange 33 spline race axles, Strange ultra lite spool, Motive lite 4.30's, Strange rear race brakes, Mega bite seniors, double adjustable uppers w/spherical bushings, Racecraft anti-roll bar, LPW rear end girdle, Metco d/s loop, A9L conversion, AFM PMS

09-23-2002, 08:15 PM	#16
88workcar Registered Member Join Date: Oct 1999 Location: Pierre Part, La. U.S.A. Posts: 1,850	87 Cory will be floored when I tell him what you run. We are looking for 12.0s at 110+ with his car. You think a 70 mm tb would help you? What MAF do you have? Did you use an Isky valve cutter or was yours done out of the car? __________________ 88workcar 1988 Mustang LX 342. 417rwhp @ 6800. 28 X 10 ET Drag, 4.30s, 10.69 @ 126.43 1.42 60ft. 11.13 @ 127.7 on BFGs 1.72 60ft Rice Hater # 42 To be old and wise, You must first be young and stupid I'm somewhere in tthe middle.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
just got my AFR's in the mail, but WTF !!!	leathal injection	Windsor Power	5	08-17-2004 06:36 AM
Stall converter and AFRs	Fox Body	Windsor Power	6	07-14-2003 08:07 PM
Roller Rockers for my AFR's.....and install questions	dragstang86	Windsor Power	4	12-31-2002 08:18 PM
Fast!!! Will 58cc AFR's work????	Stang Runner	Windsor Power	4	10-05-2001 12:15 PM
Any1 running AFR's?	Violent84	Windsor Power	0	05-04-2001 02:09 PM